 
|
HEAVY DUTY PRECISION & POWERFUL LATHEThis machine is suitable for heavy cutting, easy operation, high tenacity, stability and heavy workload, which are good for heavy turning of mold gear, shaft, central spindle etc. |
FEATURES :
1. Base:
Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.
2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1"X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.(2)Two thread per inch (1"X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloycarbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.Wider tool post and top slide are induction hardened and ground precisely to promise a long life.8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.Two stage feeding device for easy operation.|
STANDARD ACCESSORIES: |
|
| 1. X,Z-axes auto lubrication system | 9. Center sleeve MT-5 |
| 2. Metric / Inch gear box | 10. Dead center |
| 3. Coolant device | 11. Toolpost screw wrench |
| 4. Longitudinal adjustable position feed stop | 12. Level pads |
| 5. Tailstock two steps device | 13. Tools & tool & tool box |
| 6. 3-Jaw scroll chuck 10" | 14. Operation manual |
| 7. Back plate of chuck | 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200 |
8. Steady rest φ11- " |
|
| * Actual standard accessories shall be subject to quotation sheet. | |
| OPTIONAL ACCESSORIES: | |
| 1. Follow rest | 8. Back splash guard |
| 2. 4-jaw independent chuck 20" ,25" | 9. Quick change tool post (instead of tool post) ( standard or European style ) |
| 3. Face plate with 4-jaw 24",26",28",30" | 10. CE equipment |
| 4. Longitudinal & cross rapid feeding – only for HG-1200,1700 | 11. Taper turning attachment |
| 5. Halogen light | 12. Grinder |
| 6. Taper turning attachment | 13. Hydraulic copy attachment |
| 7. Digital readout | |
| MODEL | 1200 | 1700 | 2200 | 3200 | 4200 | ||||||||||||||
| CAPACITY | Swing over bed |
|
|||||||||||||||||
| Swing over cross slide | |||||||||||||||||||
| Swing over gap | |||||||||||||||||||
| Distance between centers | 1200(47.24") | 2200(86.61") | 3200(126") | 4200(165.35") | |||||||||||||||
| Bed | Width of bed | 420 (16.54") | |||||||||||||||||
| Width of gap (Spindle end face) | 305 ( 12") | ||||||||||||||||||
| Length of bed | 2600 (102.36") | 3100 (122") | 3600 (141.73") | 4600 (181.1") | 5600(220.47") | ||||||||||||||
| HEADSTOCK | Spindle bore |
ø80(3.15") OP: ø105(4.13") |
|||||||||||||||||
| Number of spindle speeds | 12 steps | ||||||||||||||||||
| Range of spindle speeds | 23-1300 r.p.m | ||||||||||||||||||
| Spindle nose |
A1-8 OP: A2-8 for spindle bore :105 mm OP: D1-8,D2-8 OP: A2-11 only for spindle bore 105mm (換行) |
||||||||||||||||||
| CARRIAGE | Width of carriage | 570 (22.44") | |||||||||||||||||
| Cross slide travel | 410 (16.14") | ||||||||||||||||||
| Compound rest travel | HG-660 : 150 (5.9”) / HG-760 : 240 (9.45" ) | ||||||||||||||||||
| Max. size cutting size | 25 X 25 (0.98"X0.98") | ||||||||||||||||||
| TAILSTOCK | Diameter of barrel | Ø 80 (3.15") | |||||||||||||||||
| Travel of barrel | 200(7.87") | ||||||||||||||||||
| Taper of barrel | MT 5 | ||||||||||||||||||
| THREADS | Lead screw diameter & pitches | Dia.45mm.Pitch 12mm / Dia.1.77"X2 T.P.I. | |||||||||||||||||
| Range of metric pitches | 0.8~14mm (65 Nos) | ||||||||||||||||||
| Range of inch pitches | 2-28 T.P.I.(36 Nos) | ||||||||||||||||||
| Range of diametral pitches | 4-56 D.P.(36 Nos) | ||||||||||||||||||
| Range of module pitches | 0.5-7M.P.(22 Nos) | ||||||||||||||||||
| FEEDS | Feed rod diameter | 32 (1.26") | |||||||||||||||||
| Range of longitudinal feeds | 0.1~1.4mm/rev (0.0044"-0.5512" in/rev) | ||||||||||||||||||
| Range of cross feeds | 0.05~0.7mm/rev (0.002"-0.0276" in/rev) | ||||||||||||||||||
| MOTOR | Main spindle motor |
10HP (7.5kw) OP: 15HP (11.25KW) |
|||||||||||||||||
| Coolant pump motor | 1/8 HP (0.1kw) | ||||||||||||||||||
| Rapid motor | 1/4 HP (0.1875 kw) | ||||||||||||||||||
| MACHINE SIZE |
Without back splash guard (LXWXH) |
HG-660 |
2600X1120X1400 (102.36"x44"x55.12") |
3100X1120X1400 (122.05"x44"x55.12") |
3600X1120X1400 ( 141.73"x44"x55.12") |
4600X1120X1400 (181.1"x44"x55.12") |
5600X1120X1400 (220.47"x44"x55.12") |
||||||||||||
| HG-760 |
2600X1120X1450 (102.36"x44"x57.09") |
3100X1120X1450 (122.05"x44"x57.09") |
3600X1120X1450 ( 141.73"x44"x57.79") |
4600X1120X1450 (181.1"x44"x57.09") |
5600X1120X1450 (220.47"x44"x57.09") |
||||||||||||||
| HG-800 |
2600X1120X1470 (102.36"x44"x57.87") |
3100X1120X1470 (122.05"x44"x57.87") |
3600X1120X1470 ( 141.73"x44"x57.87") |
4600X1120X1470 (181.1"x44"x57.87") |
5600X1120X1400 (220.47"x44"x57.87") |
||||||||||||||
| HG-840 |
2600X1120X1490 (102.36"x44"x58.66") |
3100X1120X1490 (122.05"x44"x58.66") |
3600X1120X1490 ( 141.73"x44"x58.66") |
4600X1120X1490 (181.1"x44"x58.66") |
5600X1120X1400 (220.47"x44"x58.66") |
||||||||||||||
| The width of machine size with back splash guard : 1240 mm (48.81” ) | |||||||||||||||||||
| MEASUREMENT |
N.W. / G.W. (approx) Kgs |
HG-660 | 2900 / 2950 | 3100 / 3200 | 3300 / 3450 | 3750 / 3950 | 4250 / 4450 | ||||||||||||
| HG-760 | 3100 / 3150 | 3300 / 3400 | 3500 / 3650 | 3950 / 4150 | 4450 / 4650 | ||||||||||||||
| HG-800 | 3180 / 3230 | 3380 / 3480 | 3580 / 3730 | 4030 / 4230 | 4530 / 4730 | ||||||||||||||
| HG-840 | 3260 / 3310 | 3460 / 3560 | 3660 / 3810 | 4110 / 4310 | 4610 / 4810 | ||||||||||||||
| Packing size (LxWxH) | HG-660 |
2800x1150x1800 (110"x46"x71") |
3400x1150x1800 (134"x46"x71") |
3900x1150x1800 (154"x46"x71") |
4900x1150x1800 (193"x46"x71") |
5900x1150 x1800 |
|||||||||||||
| HG-760 |
2800x1150x1850 (110"x46"x73") |
3400x1150x1850 (134”x46”x73”) |
3900x1150x1850 (154"x46"x73") |
4900x1150x1850 (193"x46"x73") |
5900x1150 x1850 (232"x46"x73") |
||||||||||||||
| HG-800 |
2800x1150x1870 (110"x46"x74") |
3400x1150x1870 (134”x46”x74”) |
3900x1150x1870 (154"x46"x74") |
4900x1150x1870 (193"x46"x74") |
5900x1150 x1890 (232"x46"x74") |
||||||||||||||
| HG-840 |
2800x1150x1890 (110"x46"x75") |
3400x1150x1890 (134”x46”x75”) |
3900x1150x1890 (154"x46"x75") |
4900x1150x1890 (193"x46"x75") |
5900x1150 x1890 (232"x46"x75") |
||||||||||||||
| The width of packing size with back splash guard : 1400 mm (55") | |||||||||||||||||||
Today visitors2
Today page views162
Total visitors57.364
Total page views379.150