Đầu lục giác Siết ốc MSTS

The Segmented Multi Stud Tensioning System (MSTS) is a portable system designed to simultaneously tension all studs on system closures such as steam generator primary and secondary manways, handwheel and valve covers. This stateof-the-art system applies a predictable and accurate preload to all studs simultaneously,thus eliminating the problems normally associated with conventional torque tightening techniques (e.g., uneven gasket preloads resulting in closure leakage, galling, broken fasteners, etc.)

Download Catalog here

Danh mục:

Features:

• Portable hydraulic tensioning systems designed to tension all studs
simultaneously on various closures

• Applies predictable pre-load to studs eliminating problems
associated with torque-tightening techniques

• Meets ALARA objectives by minimising time spent in high radiation
area’s to remove/install closures

• Lightweight segments manufactured primarily from ARMOLOY-
coated high strength steel to provide superior corrosion protection and long
life

• Highly reliable hydraulic piston seals can be replaced easily

• Pistons have overstroke indicators, high pressure release device

• Diverts high pressure fluid away from the operator if the piston
stroke is exceeded

• Sleeved hydraulic hoses protect the operator in the event of hose
failure

• Lightweight, portable air operated hydraulic control units are
available

System Features

– Profile cut body to reduce weight

– Elliptical shaped piston/rams (if necessary)

– Rare earth magnets embedded in Nut Rotating Sockets, for ease of assembly

– Single hydraulic inlet connection per segment

– Can be designed with variable bolt chambers per segment to optimize weight

– Extremely reliable machine cut polyurethane seals

Sản phẩm liên quan

Bơm Khí Nén Cầm Tay

Description: Tentec are an innovative designer of special purpose bolt tensioning equipment with a high level of focus on quality.  The company have accreditation to ISO 9001, ISO 14001:2004 & ISO 18001

Download Catalog here

Features:

  • Light weight and compact design
  • Two speed operation reduces handle strokes by as much as 75% over single speed pumps.
  • Lower Handle effort to minimize operator fatigue
  • Handle Lock and light weight construction for easy handling
  • Large oil capacity to power a wide range of Bolt Tensioners
  • Fitted with compact pressure Gauge.
  • Fitted with Quick Release Female Connection
  • Tentec also supply a range of flexible high pressure hoses, suitable for use with Tentec Bolt Tensioning products

Bơm Khí Nén Cầm Tay

Description: Tentec are an innovative designer of special purpose bolt tensioning equipment with a high level of focus on quality.  The company have accreditation to ISO 9001, ISO 14001:2004 & ISO 18001

Download Catalog here

Features:

  • Light weight and compact design
  • Two speed operation reduces handle strokes by as much as 75% over single speed pumps.
  • Lower Handle effort to minimize operator fatigue
  • Handle Lock and light weight construction for easy handling
  • Large oil capacity to power a wide range of Bolt Tensioners
  • Fitted with compact pressure Gauge.
  • Fitted with Quick Release Female Connection
  • Tentec also supply a range of flexible high pressure hoses, suitable for use with Tentec Bolt Tensioning products

Phụ Kiện Kết Nối Ống Thủy Lực 2275 / 1500

Description:  The Tentec Link Hose system is a quick and easy way to connect multiple or single bolt tensioning tools to a power pack pump. The high quality flexible hose is fitted with suitable male and female quick-release hydraulic connections that make linking bolt tensioning tools a very rapid and intuitive task. Tentec Link Hoses are supplied in 1m, 3m & 5m lengths. Other lengths are available on request.

Features:

1.   2275 Hydraulic Link Hose

  • High pressure rating
  • Compact design
  • Unique patented sealing design
  • Non-Drip on connection and disconnection
  • Dust caps included as standard
  • Built-in safety device to avoid unintentional disconnection

2.   1500 Hydraulic Link Hose

  • High pressure rating
  • Compact design
  • Unique patented sealing design
  • Non-Drip on connection and disconnection
  • Dust caps included as standard
  • Built-in safety device to avoid unintentional disconnection

Phụ Kiện Kết Nối Ống Thủy Lực 2275 / 1500

Description:  The Tentec Link Hose system is a quick and easy way to connect multiple or single bolt tensioning tools to a power pack pump. The high quality flexible hose is fitted with suitable male and female quick-release hydraulic connections that make linking bolt tensioning tools a very rapid and intuitive task. Tentec Link Hoses are supplied in 1m, 3m & 5m lengths. Other lengths are available on request.

Features:

1.   2275 Hydraulic Link Hose

  • High pressure rating
  • Compact design
  • Unique patented sealing design
  • Non-Drip on connection and disconnection
  • Dust caps included as standard
  • Built-in safety device to avoid unintentional disconnection

2.   1500 Hydraulic Link Hose

  • High pressure rating
  • Compact design
  • Unique patented sealing design
  • Non-Drip on connection and disconnection
  • Dust caps included as standard
  • Built-in safety device to avoid unintentional disconnection

Máy Bơm Siết ốc Thủy Lực – PTE

Description:

– The Tentec PTE Series Power Packs are engineered with the end user in mind. The PE Electric Pumps are manufactured to withstand harsh environments and heavy-duty applications. Each pump comes complete with a 4m (13.12ft) Twin Line Hydraulic Hose and 3m (9.8ft) Remote Pendant. Custom lengths are available.

– By setting the calibrated gauge to the desired PSI/Bar, you can ensure the proper torque output each and every time, whether running 1 tool or 4 tools.

Features:

• Two-speed high-performance pump
• External adjustable pressure regulator
• Retract side internal relief valve protects your torque wrench
• Use for double or single acting tools
• 3m Hand Remote Control
• Dimensions
W = 409mm (16.12″)
D = 533.4mm (21″)
H = 562mm (22.15″)

Máy Bơm Siết ốc Thủy Lực – PTE

Description:

– The Tentec PTE Series Power Packs are engineered with the end user in mind. The PE Electric Pumps are manufactured to withstand harsh environments and heavy-duty applications. Each pump comes complete with a 4m (13.12ft) Twin Line Hydraulic Hose and 3m (9.8ft) Remote Pendant. Custom lengths are available.

– By setting the calibrated gauge to the desired PSI/Bar, you can ensure the proper torque output each and every time, whether running 1 tool or 4 tools.

Features:

• Two-speed high-performance pump
• External adjustable pressure regulator
• Retract side internal relief valve protects your torque wrench
• Use for double or single acting tools
• 3m Hand Remote Control
• Dimensions
W = 409mm (16.12″)
D = 533.4mm (21″)
H = 562mm (22.15″)