CNC Heavy Duty Lathe

This is a heavy duty precision CNC lathe that the function of output full horse power during low & high speed, available for big, special parts and mold work pieces.

Category:

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

SPECIFICATIONS  Unit: mm / inch

SPECIFICATION  DL
ITEM 660     /     760
MODEL 1000 1500 2000 3000
CAPACITY Swing over bed 660  (26″)  /  760 (29.92″)
Swing over cross slide  400 (15.75″)  /  500 (19.69″)
Distance between centers 1000 (39.37″) 1500 (59.06″) 2000 (78.74″) 3000 (118″)
Width of bed 420 (16.54″)
Spindle end face to gap 300 ( 11.8″)
Length of bed 2640 (103.94″) 3140 (123.62″) 3640 (143.3″) 4640 (182.68″)
Bed way of carriage 1 mountain way + 1 box way
Bed way of cross slide Dovetail slide way
HEADSTOCK Spindle bore 105 (4.13″)
Spindle taper MT 5
Spindle nose A2-8
Range of spindle speed 20-1500rpm
* It changed by different horsepower of motor.
No. of spindle speed 4 steps
TRAVEL X-axis travel (cross slide travel) Manual 4-way
(Opt.)  OP-  H4 – 380 (14.96″ )  /  V8- 310 (12.2″ )  /
VDI-40 –285 (11.22″)
* It changed by different turret .
Z-axis travel ( longitudinal travel) 1000 (39.37″) 1500 (59.06″) 2000 (78.74″) 3000 (118″)
* It changed by different turret、chuck or tailstock.
X-axis ball screw diameter 25 mm ,  pitch 5 mm
Z-axis ball screw diameter  50 mm ,  pitch 10 mm
FEED X-axis rapid feed   5000 mm/min (196.85″ /min)
Z-axis rapid feed   7500 mm/min (295.28″ /min)
X-axis cutting feed rate 0-3000 mm/min (118.11″ /min)
Z-axis cutting feed rate 0-5000 mm/min (196.85″ /min)
TURRET Tool station manual 4 way
(Opt.)  ( OP- H4 / V8 / VDI-40 )
Size of external turning 25×25 (0.98″ x0.98″)
(Opt.)  ( OP-32 x 32 (1.23″X1.23″) )
Boring bar diameter 40 ( 1.57″ )
TAILSTOCK Quill diameter 105 (4.13″)
Quill travel 180 (7.09″)
Taper of center MT 5
Body movement Carried by saddle
Quill movement Manual   ( OP- Hydraulic type)
MOTOR Spindle motor 7.5kw ( 10 HP )  ,  30 min/cont.
X-axis servo motor 1.3 kw  ( 1.73 HP)
Z-axis servo motor 2.2 kw  (2.93 HP)
Hydraulic pump motor 1.5 kw  ( 2 HP)
Coolant pump 0.75 kw  (1HP )
MEASUREMENT N.W. / G.W. (approx)
(kgs)DL-660		 4600 / 4800 5200 / 5400 5900 / 6200 7000 / 7300
Machine dimensions
(kgs)DL-760		 4900 / 5100 5500 / 5700 6200 / 6500 7300 / 7600
(L x W x H)(approx) (152″x84″x76″) (172″x84″x76″) (192″x84″x76″) (231″x84″x76″)
Packing size ( by1x20’container ) 4500x2290x2240 5000x2290x2240 5500x2290x2240 6500x2290x2240
(L x W x H)(approx) (177″x90″x88″) (197″x90″x88″) (217″x90″x88″) (257″x90″x88″)
Standard color Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray

Related products

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work pieces and enhanced heavy-duty cutting ability.
(2) The gap part base is special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 10.Face plate with 4-jaw 40″
2.Spindle motor 20HP 11.Dead center
3.Electromagnetic brake 12.Center Sleeve MT-6
4.Metric / Inch gear box 13.Toolpost screw wrench
5.Longitudinal & cross rapid feeding 14.Level pads
6.Tailstock two steps device 15.Tools & Tool Box
7.X,Z-axes auto lubrication system 16.Operation manual
8.X,Z-axes with Turcite-B
9.Steady rest ø16”
OPTIONAL ACCESSORIES :
1. Coolant device
2.Follow rest
3. 4-jaw independent chuck 40″ , 50″
4. 3-jaw chuck (strong type) 20″ , 25″
5. Steady rest  ø16″, ø24″
6. Halogen light
7.Digital readout
8. Back splash guard
9. Quick change tool post  ( instead of tool post )( standard style ) ( European style only for 960series)
10.CE equipment
11.Taper turning attachment
12.Grinder
13. Hydraulic copy attachment
14. Automated rapid tool post
15. Longitudinal adjustable position feed stop
16.Five position carriage stop
17. Tailstock with quill dia. 150 / 200mm
18. Tailstock with self-rotary quill
19. Boring attachment
20. Rear tool post

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work pieces and enhanced heavy-duty cutting ability.
(2) The gap part base is special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 10.Face plate with 4-jaw 40″
2.Spindle motor 20HP 11.Dead center
3.Electromagnetic brake 12.Center Sleeve MT-6
4.Metric / Inch gear box 13.Toolpost screw wrench
5.Longitudinal & cross rapid feeding 14.Level pads
6.Tailstock two steps device 15.Tools & Tool Box
7.X,Z-axes auto lubrication system 16.Operation manual
8.X,Z-axes with Turcite-B
9.Steady rest ø16”
OPTIONAL ACCESSORIES :
1. Coolant device
2.Follow rest
3. 4-jaw independent chuck 40″ , 50″
4. 3-jaw chuck (strong type) 20″ , 25″
5. Steady rest  ø16″, ø24″
6. Halogen light
7.Digital readout
8. Back splash guard
9. Quick change tool post  ( instead of tool post )( standard style ) ( European style only for 960series)
10.CE equipment
11.Taper turning attachment
12.Grinder
13. Hydraulic copy attachment
14. Automated rapid tool post
15. Longitudinal adjustable position feed stop
16.Five position carriage stop
17. Tailstock with quill dia. 150 / 200mm
18. Tailstock with self-rotary quill
19. Boring attachment
20. Rear tool post

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light