CORRUGATED COVER

Category: Tag:

General Information: The TankCorr corrugated cover roof represents a new very competitive approach to solve coverage needs in water installations (sandblasting, decanters,..).

Features:

  • Self-supporting and a fairly light weight, minimize the volume of gases and odors existing under it.
  • This cover is highly resistant to corrosion and requires practically no maintenance.
  • The construction material is aluminium 3003 H16.
  • Design standard according to EUROCODE 1 and 9.
  • Matrix and finite element calculation.
  • Each design is supported by drawings and assembly instructions specific to each case.
  • It is suitable for installations of different geometries and shapes.

Corrugated Cover is installed at Seville city (Spain)

Related products

Internal Floating Roof – Full Contract

General Information: The I.F.R. Full Contact type is an emission-controlling device that is completely vapor-tight. The purpose of this internal floating roof is to completely remove the vapor area and seal the space above the floating roof, preventing evaporation loss.

Features:

  • The construction material can be aluminum or Stainless Steel, according to API 650 standard.
  • Its combination with an aluminum Geodetic Dome provides maximum control of the loss of emissions as well as maximum use of storage capacity.
  • The materials are compatible with a wide range of stored products.
  • Employs a single panel design. Each module is fully tested in the factory to verify the tightness of the vapors and can be individually inspected in the field.
  • Do not use complex or dangerous materials inside.
  • It does not use supports that perforate the platform, either using cables or legs to support the roof. This reduces leakage losses from drilling at very low levels compared to traditional carbon steel screens.
  • It is strong enough to withstand all sealing systems, including both primary and secondary metal seals.
  • Lightweight structure with exceptional strength, using patented construction techniques.

The Internal Floating Roof – Full Contract is installed at the Sfax city (Tunisia)

Internal Floating Roof – Full Contract

General Information: The I.F.R. Full Contact type is an emission-controlling device that is completely vapor-tight. The purpose of this internal floating roof is to completely remove the vapor area and seal the space above the floating roof, preventing evaporation loss.

Features:

  • The construction material can be aluminum or Stainless Steel, according to API 650 standard.
  • Its combination with an aluminum Geodetic Dome provides maximum control of the loss of emissions as well as maximum use of storage capacity.
  • The materials are compatible with a wide range of stored products.
  • Employs a single panel design. Each module is fully tested in the factory to verify the tightness of the vapors and can be individually inspected in the field.
  • Do not use complex or dangerous materials inside.
  • It does not use supports that perforate the platform, either using cables or legs to support the roof. This reduces leakage losses from drilling at very low levels compared to traditional carbon steel screens.
  • It is strong enough to withstand all sealing systems, including both primary and secondary metal seals.
  • Lightweight structure with exceptional strength, using patented construction techniques.

The Internal Floating Roof – Full Contract is installed at the Sfax city (Tunisia)

DRAIN SYSTEM

General Information: The TankDrain is necessary and essential to prevent the floating roof from sinking in case of accumulation of water or snow on it. The accumulated product gets into a drain sump on the roof, then into a drain system and finally into a drain valve on the shell at the base of the tank to get out

Features:

  • The floating roof drain systems are custom designed and engineered to suit your tank.
  • The elasticity of Flexible systems is combined with the strength of Swivel Joints.
  • Side plates are available in galvanized steel (standard) or as an option in stainless steel and redistribute the load around the flexible hose, minimizing the possibility of hose failure.
  • Fixed position (limited scraping)
  • Compatibility with an extensive product range
  • High operating pressure
  • Free water flow due to continuous slope
  • Stress- and load-free hose end connections
  • No lubrication required

The Drain System is installed at the  A Coruña city (Spain)

DRAIN SYSTEM

General Information: The TankDrain is necessary and essential to prevent the floating roof from sinking in case of accumulation of water or snow on it. The accumulated product gets into a drain sump on the roof, then into a drain system and finally into a drain valve on the shell at the base of the tank to get out

Features:

  • The floating roof drain systems are custom designed and engineered to suit your tank.
  • The elasticity of Flexible systems is combined with the strength of Swivel Joints.
  • Side plates are available in galvanized steel (standard) or as an option in stainless steel and redistribute the load around the flexible hose, minimizing the possibility of hose failure.
  • Fixed position (limited scraping)
  • Compatibility with an extensive product range
  • High operating pressure
  • Free water flow due to continuous slope
  • Stress- and load-free hose end connections
  • No lubrication required

The Drain System is installed at the  A Coruña city (Spain)

FLOATING SUCTION SYSTEM

General Information: The Floating Suction System is designed to eliminate the accumulated product on the surface of the stored product.

Features:

  • It is designed to work in tanks of any size, with all types of floating roofs and with components compatible with any stored product.
  • It can be used with and without floating roofs.

The design is made for each specific case, guaranteeing a long life free of worries.

The Floating Suction System is installed at the Cadiz city (Spain)

 

FLOATING SUCTION SYSTEM

General Information: The Floating Suction System is designed to eliminate the accumulated product on the surface of the stored product.

Features:

  • It is designed to work in tanks of any size, with all types of floating roofs and with components compatible with any stored product.
  • It can be used with and without floating roofs.

The design is made for each specific case, guaranteeing a long life free of worries.

The Floating Suction System is installed at the Cadiz city (Spain)