HEAVY DUTY FACING LATHE

It is suitable for turning and cutting of large work piece and steel rod materials for heavy industries like oil pipe network, aerospace and heavy-duty shaft processing.

Category:

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work pieces and enhanced heavy-duty cutting ability.
(2) The gap part base is special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 10.Face plate with 4-jaw 40″
2.Spindle motor 20HP 11.Dead center
3.Electromagnetic brake 12.Center Sleeve MT-6
4.Metric / Inch gear box 13.Toolpost screw wrench
5.Longitudinal & cross rapid feeding 14.Level pads
6.Tailstock two steps device 15.Tools & Tool Box
7.X,Z-axes auto lubrication system 16.Operation manual
8.X,Z-axes with Turcite-B
9.Steady rest ø16”
OPTIONAL ACCESSORIES :
1. Coolant device
2.Follow rest
3. 4-jaw independent chuck 40″ , 50″
4. 3-jaw chuck (strong type) 20″ , 25″
5. Steady rest  ø16″, ø24″
6. Halogen light
7.Digital readout
8. Back splash guard
9. Quick change tool post  ( instead of tool post )( standard style ) ( European style only for 960series)
10.CE equipment
11.Taper turning attachment
12.Grinder
13. Hydraulic copy attachment
14. Automated rapid tool post
15. Longitudinal adjustable position feed stop
16.Five position carriage stop
17. Tailstock with quill dia. 150 / 200mm
18. Tailstock with self-rotary quill
19. Boring attachment
20. Rear tool post

SPECIFICATION

Unit: mm / inch

MODEL
HL-1500, 2000, 2500
CAPACITY Swing over bed 1500 2000 2500
Swing over cross slide 1100 1600 2100
Distance between centers 1000 1500 2000
BED Swing over gap 1900 2400 2900
Width of bed
2010 (79″)
Length of bed
1150
 1650 2150
Bed way 3 ways
HEADSTOCK Spindle bore diameter
152 (6″) OP: 230 (9″)
Numbered of spindle speeds
16 steps
Range of spindle speeds
4~420 rpm
Spindle nose
ASA A2-11 / OP:A2-15,A2-20
Top slide travel(Compound rest travel)
370(14.57″)
Max. size cutting size
40 x 40(1.57″ x 1.57″)
THREADS Lead screw diameter and pitch
Dia. 60mm, Pitch:12mm / DIa.1″ X 2T.P.I.
Range of metric pitches
1~120 (62 Nos)
Range of inch pitches
0.25-30 T.P.I (70 Nos)
Diametrical pitches
1-120 DP (70 Nos)
Range of module pitches
0.25~30 MP (53 Nos)
FEEDS Feed rod diameter
32 (1.26″)
Range of longitudinal feeds
0.06-7.04mm / rev (0.0024″-0.28″ in/rev )
Range of cross feeds
0.03-3.52mm / rev(0.0012″-0.14″ in/rev)
MOTOR Main spindle motor
30HP (22.5kw)
Coolant pump motor
1/8HP (0.1kw)
color Upper parts+ lower parts light gray white RAL-7035 + blueRAL-5015

Related products

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout