Filter

Showing all 7 results

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

CNC Lathe

Description:

  • The spindle is mounted with high-precision P4 angular contact ball bearings, providing outstanding radial and trust loads.
  • The spindle is precision machined from high-quality alloy steel, hardened, precision ground and dynamically balanced, making it ideal for heavy cutting.
  • Equipped with high-speed spindle, speed up to optional 3000 r.p.m.
STANDARD ACCESSORIES
1. Controller: POU YUEN LNC-T600 1 set 12. Semi-back splash guard 1 set
2. Spindle variable speed change 1 set 13. Enclosed electric cabinet 1 set
3. Lubrication system 1 set 14. Heat exchanger 1 set
4. Z-axes with Turcite-B 1 set 15. Electron hand wheel 1 set
5. XZ-axes C5 ball screw 1 set 16. Alarm lamp for working,& cutting finish 1 set
6. Z-axis adjustable zero point position 1 set 17. Work lamp 1 set
7. Steady rest Ø6” 1 set 18. Dead center 1 set
8. Quick change 4-way tool post 1 set 19. Level pads 1 set
9. Manual Tailstock 1 set 20. Tools & tool box 1 set
10. Tailstock interference protection 1 set 21. Operational manual 1 set
11. Coolant system 1 set 22. 3-jaw chuck SC-9” 1 set

OPTIONAL ACCESSORIES
1-1. Controller :FANUC 1 set
1-2. Controller : FAGOR 1 set
2. Transformer 1 set
3. Hydraulic 3-jaw wedge type through-hole power chuck 8″ 1 set
4. Hydraulic 3-jaw wedge type non-through-hole power chuck 8″ 1 set
5. Electronic 4-way turret H4 1 set
6. Hydraulic turret V8 1 set
7. Chip conveyor 1 set
8. Hydraulic tailstock quill 1 set
9. Follow rest 1 set
10. 2-Axes linear scale 1 set
11. Full enclosed splash guard  ( instead of semi-back splash guard change ) 1 set
12. Gang type tool holder ( instead of quick change 4-way tool post ) 1 set

CNC Lathe

Description:

  • The spindle is mounted with high-precision P4 angular contact ball bearings, providing outstanding radial and trust loads.
  • The spindle is precision machined from high-quality alloy steel, hardened, precision ground and dynamically balanced, making it ideal for heavy cutting.
  • Equipped with high-speed spindle, speed up to optional 3000 r.p.m.
STANDARD ACCESSORIES
1. Controller: POU YUEN LNC-T600 1 set 12. Semi-back splash guard 1 set
2. Spindle variable speed change 1 set 13. Enclosed electric cabinet 1 set
3. Lubrication system 1 set 14. Heat exchanger 1 set
4. Z-axes with Turcite-B 1 set 15. Electron hand wheel 1 set
5. XZ-axes C5 ball screw 1 set 16. Alarm lamp for working,& cutting finish 1 set
6. Z-axis adjustable zero point position 1 set 17. Work lamp 1 set
7. Steady rest Ø6” 1 set 18. Dead center 1 set
8. Quick change 4-way tool post 1 set 19. Level pads 1 set
9. Manual Tailstock 1 set 20. Tools & tool box 1 set
10. Tailstock interference protection 1 set 21. Operational manual 1 set
11. Coolant system 1 set 22. 3-jaw chuck SC-9” 1 set

OPTIONAL ACCESSORIES
1-1. Controller :FANUC 1 set
1-2. Controller : FAGOR 1 set
2. Transformer 1 set
3. Hydraulic 3-jaw wedge type through-hole power chuck 8″ 1 set
4. Hydraulic 3-jaw wedge type non-through-hole power chuck 8″ 1 set
5. Electronic 4-way turret H4 1 set
6. Hydraulic turret V8 1 set
7. Chip conveyor 1 set
8. Hydraulic tailstock quill 1 set
9. Follow rest 1 set
10. 2-Axes linear scale 1 set
11. Full enclosed splash guard  ( instead of semi-back splash guard change ) 1 set
12. Gang type tool holder ( instead of quick change 4-way tool post ) 1 set

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work pieces and enhanced heavy-duty cutting ability.
(2) The gap part base is special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 10.Face plate with 4-jaw 40″
2.Spindle motor 20HP 11.Dead center
3.Electromagnetic brake 12.Center Sleeve MT-6
4.Metric / Inch gear box 13.Toolpost screw wrench
5.Longitudinal & cross rapid feeding 14.Level pads
6.Tailstock two steps device 15.Tools & Tool Box
7.X,Z-axes auto lubrication system 16.Operation manual
8.X,Z-axes with Turcite-B
9.Steady rest ø16”
OPTIONAL ACCESSORIES :
1. Coolant device
2.Follow rest
3. 4-jaw independent chuck 40″ , 50″
4. 3-jaw chuck (strong type) 20″ , 25″
5. Steady rest  ø16″, ø24″
6. Halogen light
7.Digital readout
8. Back splash guard
9. Quick change tool post  ( instead of tool post )( standard style ) ( European style only for 960series)
10.CE equipment
11.Taper turning attachment
12.Grinder
13. Hydraulic copy attachment
14. Automated rapid tool post
15. Longitudinal adjustable position feed stop
16.Five position carriage stop
17. Tailstock with quill dia. 150 / 200mm
18. Tailstock with self-rotary quill
19. Boring attachment
20. Rear tool post

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work pieces and enhanced heavy-duty cutting ability.
(2) The gap part base is special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 10.Face plate with 4-jaw 40″
2.Spindle motor 20HP 11.Dead center
3.Electromagnetic brake 12.Center Sleeve MT-6
4.Metric / Inch gear box 13.Toolpost screw wrench
5.Longitudinal & cross rapid feeding 14.Level pads
6.Tailstock two steps device 15.Tools & Tool Box
7.X,Z-axes auto lubrication system 16.Operation manual
8.X,Z-axes with Turcite-B
9.Steady rest ø16”
OPTIONAL ACCESSORIES :
1. Coolant device
2.Follow rest
3. 4-jaw independent chuck 40″ , 50″
4. 3-jaw chuck (strong type) 20″ , 25″
5. Steady rest  ø16″, ø24″
6. Halogen light
7.Digital readout
8. Back splash guard
9. Quick change tool post  ( instead of tool post )( standard style ) ( European style only for 960series)
10.CE equipment
11.Taper turning attachment
12.Grinder
13. Hydraulic copy attachment
14. Automated rapid tool post
15. Longitudinal adjustable position feed stop
16.Five position carriage stop
17. Tailstock with quill dia. 150 / 200mm
18. Tailstock with self-rotary quill
19. Boring attachment
20. Rear tool post

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout

HIGH SPEED PRECISION LAT

FEATURES :

1.One piece Meehamite casting machine base.

2.Metric & inch gear box with full range, no-need gears exchange.

3.Apron enforced oil supply with safety device is used to avoid collision.

4.Bed ways & face of compound rest have been ultra-frequency treated & ground with longer life.

5.Cross way feeding guides screw: 2points support for heavy cutting.

6.Length safety foot brake.

7.Dynamically balanced alloy spindle by 3 point support.

8.Hardened & precision ground gears.

STANDARD ACCESSORIES
1. XZ-axes auto lubrication system 1 set 8.Center sleeve 1 pc
2. Metric/ lnch gear box 1 set 9.Center 2 pcs
3. Coolant device 1 set 10.Tool post screw wrench 1 set
4. Longitudinal apron motion feed 1 set 11.Level pads 1 set
5. Tailstock 1 set 12.Tools& tool box 1 set
6. 3-Jaw scroll chuck7」 1 set 13.Operation manual 1 set
7.Steady rest Ø6」 1 set

OPTIONAL ACCESSORIES
1. Follow rest 1 set
2. 4-jaw independent chuck 12」 1 set
3. Face plate 14」 1 set
4. Back flash guard 1 set
5. Halogen light 1 set
6. Digital readout linear scale 1 set
7. 3-Jaw strong scroll cruck

HIGH SPEED PRECISION LAT

FEATURES :

1.One piece Meehamite casting machine base.

2.Metric & inch gear box with full range, no-need gears exchange.

3.Apron enforced oil supply with safety device is used to avoid collision.

4.Bed ways & face of compound rest have been ultra-frequency treated & ground with longer life.

5.Cross way feeding guides screw: 2points support for heavy cutting.

6.Length safety foot brake.

7.Dynamically balanced alloy spindle by 3 point support.

8.Hardened & precision ground gears.

STANDARD ACCESSORIES
1. XZ-axes auto lubrication system 1 set 8.Center sleeve 1 pc
2. Metric/ lnch gear box 1 set 9.Center 2 pcs
3. Coolant device 1 set 10.Tool post screw wrench 1 set
4. Longitudinal apron motion feed 1 set 11.Level pads 1 set
5. Tailstock 1 set 12.Tools& tool box 1 set
6. 3-Jaw scroll chuck7」 1 set 13.Operation manual 1 set
7.Steady rest Ø6」 1 set

OPTIONAL ACCESSORIES
1. Follow rest 1 set
2. 4-jaw independent chuck 12」 1 set
3. Face plate 14」 1 set
4. Back flash guard 1 set
5. Halogen light 1 set
6. Digital readout linear scale 1 set
7. 3-Jaw strong scroll cruck

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light