Sonic Flares – VariMach

Category:

The VariMach sonic flare tip features spring-actuated variable sonic nozzles that allow the exit area to vary with pressure, ensuring constant sonic velocity of waste gas. This industry-proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized throughout the entire range of flow, yielding shorter stack heights and reducing material costs. Additionally, the VariMach has the lowest purge rate of any flare technology on the market, minimizing utility costs while maintaining flashback protection.

Related products

Slot-Fow Ais-Assist Flares (SFVP)

Slot Flow Air Assisted flares are comprised of two concentric risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure airflow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. SFVP flares generally dispose of heavier waste gases which have a greater tendency to smoke.

Slot-Fow Ais-Assist Flares (SFVP)

Slot Flow Air Assisted flares are comprised of two concentric risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure airflow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. SFVP flares generally dispose of heavier waste gases which have a greater tendency to smoke.

Flame Ring Flares (Low Heating Value)

Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare, without the use of assist gas or a flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU applications such as those involving large quantities of CO2 gas. A circumferential ring of fire at the flare tip provides stable, reliable ignition and prevents potential auto-suppression of the flame in these low-BTU applications.

Flame Ring Flares (Low Heating Value)

Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare, without the use of assist gas or a flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU applications such as those involving large quantities of CO2 gas. A circumferential ring of fire at the flare tip provides stable, reliable ignition and prevents potential auto-suppression of the flame in these low-BTU applications.

Utility Flare

GENERAL DESCRIPTION

Utility flares are one of the most common and basic flare designs. Utility flares are employed in applications that do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium.  Utility flares therefore, do not require auxiliary gas streams such as steam or air; two fluids normally used to improve smokeless capacity.  These flares are typically accompanied by a Dynamic Seal in the base of the tip to reduce purge gas costs and prevent flashback.  Additionally, the Flare Industries’ Utility Tip incorporates a flame retention ring to eliminate flame lift-off and provide stable, reliable combustion.

ADVANTAGES

  • Cost effective (capital as well as operating costs)
  • Low maintenance costs due to simplicity of design
  • Stable, reliable combustion

Utility Flare

GENERAL DESCRIPTION

Utility flares are one of the most common and basic flare designs. Utility flares are employed in applications that do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium.  Utility flares therefore, do not require auxiliary gas streams such as steam or air; two fluids normally used to improve smokeless capacity.  These flares are typically accompanied by a Dynamic Seal in the base of the tip to reduce purge gas costs and prevent flashback.  Additionally, the Flare Industries’ Utility Tip incorporates a flame retention ring to eliminate flame lift-off and provide stable, reliable combustion.

ADVANTAGES

  • Cost effective (capital as well as operating costs)
  • Low maintenance costs due to simplicity of design
  • Stable, reliable combustion