Aero Model: WTF

Category:

Description: The new Aero WTF is a purpose designed range of hydraulic bolt tensioning tools developed by Tentec and designed to suit most wind turbine foundation bolting applications. The Aero WTF tensioning tools can be supplied to suit many different All Thread Bars and the more conventionally ISO metric and Imperial Unified Thread forms. These feature packed tensioners have been designed with rapid tensioning in mind and offer a safe, reliable and consistent method to simultaneously tension many Foundation bolts. The Tentec Aero WTF range of tensioning tools have been fully site evaluated in the wind energy industry

Features:

  • Quick Delivery
  • Local Stock
  • On-Site Support
  • On-Site Training
  • Technical Assistance
  • Easy On-Site Tool
  • Maintenance

Related products

Torque Wrench Pumps Series: ADR & EDR

Description: Micron and Xtra pump units from Tentec are hydraulic power systems suitable for virtually all industrial, hydraulic cylinder applications. Tentec pumps are versatile, of robust construction and also provide total portability. Powered by air or electric motors, the units are simple to use and easy to maintain. Operating at 10000psi (690 bar) both systems deliver superb performance whatever the application.

Features:

  • Single-acting and manual double-acting hydraulic pump units in both series available on request
  • Also offered are pumps with high-level safety specifications for Zone 3, 2 and 1

 

Torque Wrench Pumps Series: ADR & EDR

Description: Micron and Xtra pump units from Tentec are hydraulic power systems suitable for virtually all industrial, hydraulic cylinder applications. Tentec pumps are versatile, of robust construction and also provide total portability. Powered by air or electric motors, the units are simple to use and easy to maintain. Operating at 10000psi (690 bar) both systems deliver superb performance whatever the application.

Features:

  • Single-acting and manual double-acting hydraulic pump units in both series available on request
  • Also offered are pumps with high-level safety specifications for Zone 3, 2 and 1

 

Optimus -Subsea Flange Pulling System (FPS)

Description: The Tentec flange pulling system offers the highest pulling force of all the systems available today.  Each cylinder is able to pull with a force of 259kN (26Tons). Up to 4 Flange pulling cylinders can be ganged together to achieve a total pulling force of 1036kN (103 Tons). The FPS can be configured in various modes to achieve the right level of control and pulling force for every application. The system features automatic collet release which means no
diver intervention between each pulling stroke.

Download Catalog here

Features:

  •  Manufactured from High strength Stainless Steel to minimise maintenance.
  •  Long Pulling Stroke
  •  Independent control of each cylinder
  •  Automatic collet release.
  •  Controls can be mounted on each cylinder or away from the cylinders via a remote control panel
  •  Compact design to minimise weight
  • The Tentec FPS is very versatile and can be configured to suit various types of pulling work. The base configuration offers the control valves mounted directly onto the body of the pulling cylinders and offers complete individual control of each puller stroke. For pulling work where no individual cylinder control is required a remote control panel can be supplied which is positioned away from the FPS and can be comfortably controlled by just a single diver.
  • The Tentec FPS can be used with a choice of 2 different wire ropes. Using Tentec Wire Rope (WSC34x7) the system can pull to a force of 129.5kN (13 Tons), Tentec Wire Rope WSC34x7 offers a very versatile pulling method with the highest level of rope flexability.
  •  For pulling jobs where more pulling force is required, Tentec offers Tentec Strand Cable (WSCx7) a much stronger wire rope which can withstand a pulling force of 259kN (26 Tons) WSCx7 is not as flexible as WSC34x7 but offers much higher pulling force capacity.

Optimus -Subsea Flange Pulling System (FPS)

Description: The Tentec flange pulling system offers the highest pulling force of all the systems available today.  Each cylinder is able to pull with a force of 259kN (26Tons). Up to 4 Flange pulling cylinders can be ganged together to achieve a total pulling force of 1036kN (103 Tons). The FPS can be configured in various modes to achieve the right level of control and pulling force for every application. The system features automatic collet release which means no
diver intervention between each pulling stroke.

Download Catalog here

Features:

  •  Manufactured from High strength Stainless Steel to minimise maintenance.
  •  Long Pulling Stroke
  •  Independent control of each cylinder
  •  Automatic collet release.
  •  Controls can be mounted on each cylinder or away from the cylinders via a remote control panel
  •  Compact design to minimise weight
  • The Tentec FPS is very versatile and can be configured to suit various types of pulling work. The base configuration offers the control valves mounted directly onto the body of the pulling cylinders and offers complete individual control of each puller stroke. For pulling work where no individual cylinder control is required a remote control panel can be supplied which is positioned away from the FPS and can be comfortably controlled by just a single diver.
  • The Tentec FPS can be used with a choice of 2 different wire ropes. Using Tentec Wire Rope (WSC34x7) the system can pull to a force of 129.5kN (13 Tons), Tentec Wire Rope WSC34x7 offers a very versatile pulling method with the highest level of rope flexability.
  •  For pulling jobs where more pulling force is required, Tentec offers Tentec Strand Cable (WSCx7) a much stronger wire rope which can withstand a pulling force of 259kN (26 Tons) WSCx7 is not as flexible as WSC34x7 but offers much higher pulling force capacity.

SD- Series Haydraulic Torque Wrench-Atlas copco

Description: 

– The SD-Series from Tentec is an innovative range of square drive conventional hydraulic torque wrenches. The one piece body housing offers rigidity, strength and robustness in a surprisingly lightweight form. The SD-Series torque output ranges from 1722N.m (1270ft.lbs) to a staggering 78625N.m (58000ft.lbs).

– The SD-Series from Tentec offers a huge selection of alternative optional reaction arms. Which guarantee a reaction point solution no matter how unusual the bolted application. Most reaction arms feature a sturdy “release button” built within the reaction arm housing and replacable wear pads.

– Not only is the SD-Series a strong workhorse of a wrench, it also offers refined features that make the ease of use of this wrench, world class. From the full 360º by 360º swivel connections to a convenient pressure/torque chart, laser etched onto the nose of the tool.

Download Catalog here

Features:

  • Multi-Tooth Ratchet
    High strength teeth provide fast 27º torque strength.
  • Reaction Arm Release Button
    Is protected within the reaction arm housing
  • Replaceable Wear Pad
    Site replacement feature protects reaction arm.
  • Long Length Reaction Arm
    Allows for reaction on most applications
  • “Push Through” Square Drive
    Simply push to switch from loosen to tighten
  • Anti-Backlash Mechanism
    Provides hands free operation
  • MONO Body Housing
    Adds strength, rigidity and robustness to the torque wrench
  • Laser Engraved Torque Chart
    No more searching for paper pressure charts
  • Add-Ons
    Many special optional addons are available, such as spanner wrenches, reducers and sockets.
  • Non-Drip Quick Connect Couplers
    Assures easy and safe operation
  • Optional CD Handle Kit
    An ergonomically designed handle for the CD Series Torque Wrenches.Part Number: ACC-TCH-8. Accessories ►
  • Optional Quad Kit
    Link up to 4 CD – Series wrenches together using the PE/PA Quad Kit. Refer to the Tentec PE/PA Pump page for further details

SD- Series Haydraulic Torque Wrench-Atlas copco

Description: 

– The SD-Series from Tentec is an innovative range of square drive conventional hydraulic torque wrenches. The one piece body housing offers rigidity, strength and robustness in a surprisingly lightweight form. The SD-Series torque output ranges from 1722N.m (1270ft.lbs) to a staggering 78625N.m (58000ft.lbs).

– The SD-Series from Tentec offers a huge selection of alternative optional reaction arms. Which guarantee a reaction point solution no matter how unusual the bolted application. Most reaction arms feature a sturdy “release button” built within the reaction arm housing and replacable wear pads.

– Not only is the SD-Series a strong workhorse of a wrench, it also offers refined features that make the ease of use of this wrench, world class. From the full 360º by 360º swivel connections to a convenient pressure/torque chart, laser etched onto the nose of the tool.

Download Catalog here

Features:

  • Multi-Tooth Ratchet
    High strength teeth provide fast 27º torque strength.
  • Reaction Arm Release Button
    Is protected within the reaction arm housing
  • Replaceable Wear Pad
    Site replacement feature protects reaction arm.
  • Long Length Reaction Arm
    Allows for reaction on most applications
  • “Push Through” Square Drive
    Simply push to switch from loosen to tighten
  • Anti-Backlash Mechanism
    Provides hands free operation
  • MONO Body Housing
    Adds strength, rigidity and robustness to the torque wrench
  • Laser Engraved Torque Chart
    No more searching for paper pressure charts
  • Add-Ons
    Many special optional addons are available, such as spanner wrenches, reducers and sockets.
  • Non-Drip Quick Connect Couplers
    Assures easy and safe operation
  • Optional CD Handle Kit
    An ergonomically designed handle for the CD Series Torque Wrenches.Part Number: ACC-TCH-8. Accessories ►
  • Optional Quad Kit
    Link up to 4 CD – Series wrenches together using the PE/PA Quad Kit. Refer to the Tentec PE/PA Pump page for further details