HEAVY DUTY PRECISION & POWERFUL LATHE

This machine is suitable for heavy cutting, easy operation, high tenacity, stability and heavy workload, which are good for heavy turning of mold gear, shaft, central spindle etc.

Category:

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout
MODEL 1200 1700 2200 3200 4200
CAPACITY Swing over bed
660(25.98″) 760(29.92″) 800(31.5″) 840(33″)
410(16.14″) 510(20.08″) 550(21.65″) 590(23.23″)
930(36.61″) 1030(40.55″) 1070(42.13″) 1110(43.7″)
Swing over cross slide
Swing over gap
Distance between centers 1200(47.24″) 2200(86.61″) 3200(126″) 4200(165.35″)
Bed Width of bed 420 (16.54″)
Width of gap (Spindle end face) 305 ( 12″)
Length of bed 2600  (102.36″) 3100  (122″) 3600  (141.73″) 4600  (181.1″) 5600(220.47″)
HEADSTOCK Spindle bore ø80(3.15″)
OP: ø105(4.13″)
Number of spindle speeds 12 steps
Range of spindle speeds 23-1300 r.p.m
Spindle nose A1-8
OP: A2-8 for spindle bore :105 mm
OP: D1-8,D2-8
OP: A2-11 only for spindle bore 105mm (換行)
CARRIAGE Width of carriage 570 (22.44″)
Cross slide travel 410 (16.14″)
Compound rest travel HG-660 :  150 (5.9”)  /  HG-760 : 240 (9.45″ )
Max. size cutting size 25 X 25 (0.98″X0.98″)
TAILSTOCK Diameter of barrel Ø 80  (3.15″)
Travel of barrel 200(7.87″)
Taper of barrel MT 5
THREADS Lead screw diameter & pitches Dia.45mm.Pitch 12mm / Dia.1.77″X2 T.P.I.
Range of metric pitches 0.8~14mm (65 Nos)
Range of inch pitches 2-28 T.P.I.(36 Nos)
Range of diametral pitches 4-56 D.P.(36 Nos)
Range of module pitches 0.5-7M.P.(22 Nos)
FEEDS Feed rod diameter 32 (1.26″)
Range of longitudinal feeds 0.1~1.4mm/rev (0.0044″-0.5512″ in/rev)
Range of cross feeds 0.05~0.7mm/rev (0.002″-0.0276″ in/rev)
MOTOR Main spindle motor 10HP (7.5kw)
OP: 15HP (11.25KW)
Coolant pump motor 1/8 HP (0.1kw)
Rapid motor 1/4 HP (0.1875 kw)
MACHINE SIZE Without back splash
guard (LXWXH)		 HG-660 2600X1120X1400
(102.36″x44″x55.12″)		 3100X1120X1400
(122.05″x44″x55.12″)		 3600X1120X1400
( 141.73″x44″x55.12″)		 4600X1120X1400
(181.1″x44″x55.12″)		 5600X1120X1400
(220.47″x44″x55.12″)
HG-760 2600X1120X1450
(102.36″x44″x57.09″)		 3100X1120X1450
(122.05″x44″x57.09″)		 3600X1120X1450
( 141.73″x44″x57.79″)		 4600X1120X1450
(181.1″x44″x57.09″)		 5600X1120X1450
(220.47″x44″x57.09″)
HG-800 2600X1120X1470
(102.36″x44″x57.87″)		 3100X1120X1470
(122.05″x44″x57.87″)		 3600X1120X1470
( 141.73″x44″x57.87″)		 4600X1120X1470
(181.1″x44″x57.87″)		 5600X1120X1400
(220.47″x44″x57.87″)
HG-840 2600X1120X1490
(102.36″x44″x58.66″)		 3100X1120X1490
(122.05″x44″x58.66″)		 3600X1120X1490
( 141.73″x44″x58.66″)		 4600X1120X1490
(181.1″x44″x58.66″)		 5600X1120X1400
(220.47″x44″x58.66″)
The width of machine size with back splash guard : 1240 mm (48.81” )
MEASUREMENT N.W. / G.W. (approx)
Kgs		 HG-660 2900 / 2950 3100 / 3200 3300 / 3450 3750 / 3950 4250 / 4450
HG-760 3100 / 3150 3300 / 3400 3500 / 3650 3950 / 4150 4450 / 4650
HG-800 3180 / 3230 3380 / 3480 3580 / 3730 4030 / 4230 4530 / 4730
HG-840 3260 / 3310 3460 / 3560 3660 / 3810 4110 / 4310 4610 / 4810
Packing size (LxWxH) HG-660 2800x1150x1800
(110″x46″x71″)		 3400x1150x1800
(134″x46″x71″)		 3900x1150x1800
(154″x46″x71″)		 4900x1150x1800
(193″x46″x71″)		 5900×1150 x1800
(232″x46″x71″)
HG-760 2800x1150x1850
(110″x46″x73″)		 3400x1150x1850
(134”x46”x73”)		 3900x1150x1850
(154″x46″x73″)		 4900x1150x1850
(193″x46″x73″)		 5900×1150 x1850
(232″x46″x73″)
HG-800 2800x1150x1870
(110″x46″x74″)		 3400x1150x1870
(134”x46”x74”)		 3900x1150x1870
(154″x46″x74″)		 4900x1150x1870
(193″x46″x74″)		 5900×1150 x1890
(232″x46″x74″)
HG-840 2800x1150x1890
(110″x46″x75″)		 3400x1150x1890
(134”x46”x75”)		 3900x1150x1890
(154″x46″x75″)		 4900x1150x1890
(193″x46″x75″)		 5900×1150 x1890
(232″x46″x75″)

Related products

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light

HIGH SPEED VARIABLE-SPEED LATHE

Main Features / Variable spindle, auto speed change.

1.Non-stop face milling and speed adjustable.

2.Mon-stop inner and outer diameter turning and speed adjustable.

3.Automatic switch between fast and slow spindle retreat when machine is not in operation.

4.No speed jump happening during turning operation to protect gears.

5.Metric / Inch gear box, no-need for gear exchange and easy for operation.

STANDARD ACCESSORIES
1. XZ-axes auto. lubrication system 8.Center sleeve
2. Metric / inch gear box 9. Dead center
3. Coolant device 10. Toolpost screw wrench
4. Longitudinal apron motion feed 11. Level pads
5.3-jaw scroll chuck 12. Tools & tool box
6. Back plate of chuck 13. Operation manual
7. Steady rest

OPTIONAL ACCESSORIES
1. Follow rest
2. 4-jaw independent chuck
3. Face plate
4. Splash guard
5. Digital readout
6. Halogen Work light