84-24-3974 7541 
The Mirage LB3060 specialized machine is a specialized reamer capable of boring holes with a diameter of 38mm-610mm with a length of up to 610mm, especially the machine can drill holes of flanges up to 3000mm apart. The machine is compactly designed, easy to operate, convenient for moving, maintaining and repairing equipment at construction sites.
The machine uses pneumatic or hydraulic transmission which is very safe for tools
Bernoulli’s principle states that for an inviscid flow, an increase in the speed of the fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid’s potential energy.[1][2] Bernoulli’s principle is named after the Dutch-Swiss mathematician Daniel Bernoulli who published his principle in his book Hydrodynamica in 1738.
Bernoulli’s principle can be applied to various types of fluid flow, resulting in what is loosely denoted as Bernoulli’s equation. In fact, there are different forms of the Bernoulli equation for different types of flow. The simple form of Bernoulli’s principle is valid for incompressible flows (e.g. most liquid flows) and also for compressible flows (e.g. gases) moving at low Mach numbers. More advanced forms may in some cases be applied to compressible flows at higher Mach numbers (see the derivations of the Bernoulli equation).
Bernoulli’s principle can be derived from the principle of conservation of energy. This states that in a steady flow the sum of all forms of mechanical energy in a fluid along a streamline is the same at all points on that streamline. This requires that the sum of kinetic energy and potential energy remain constant. If the fluid is flowing out of a reservoir the sum of all forms of energy is the same on all streamlines because in a reservoir the energy per unit mass (the sum of pressure and gravitational potential ρ g h) is the same everywhere.
Fluid particles are subject only to pressure and their own weight. If a fluid is flowing horizontally and along a section of a streamline, where the speed increases it can only be because the fluid on that section has moved from a region of higher pressure to a region of lower pressure; and if its speed decreases, it can only be because it has moved from a region of lower pressure to a region of higher pressure. Consequently, within a fluid flowing horizontally, the highest speed occurs where the pressure is lowest, and the lowest speed occurs where the pressure is highest.
