Mechanical Vapor Recovery (MVR)

Category:
Jordan Technologies s’ mechanical vapor recovery unit (MVR) provides a reliable, low maintenance solution for condensate and liquid storage vapor recovery. The MVR unit is one of Jordan Energy Solutions’ answers to capturing natural gas emissions from oil field stock tanks.
The Jordan MVR unit is a customizable pre-engineered vapor recovery unit capable of moving .018 to 400 MCFD. The MVR unit may use rotary screw, piston or scroll compressors powered with either electric or EPA certified natural gas industrial power plants. Additionally the unit contains state-of-the-art PLC based regulation with an integrated gas blanketing system, not a rough on/off pressure switch and a pump.
Ideal for nonattainment areas where state and federal air quality regulatory requirements require vapor recovery or other emission controls, the MVR unit is an alternative to venting or flaring and will maintain storage tank pressure within safe limits and correct tank operating parameters automatically. This helps you recover every BTU and avoid releasing any vapor into the atmosphere.
High reliability, low maintenance, simple foundations, low operating costs, low initial costs, low consumed power at unloaded condition, and suitability for process fluctuation— such as gas composition and pressure— are some of the basic attributes of the rotary screw compressor MVR unit.
Jordan’s reliable MVR unit is designed using the Jordan Technologies’/Jordan Energy Solutions’ years of experience as a global technology leader in vapor recovery and is based on time-tested rotary screw gas compression technology.

MVR UNIT FEATURES

Based on many years of field service experience, we have taken our knowledge and incorporated it into equipment and systems offering unique design and features that always meet or exceed industry standards.

  • Fully automated, PLC based operation
  • Integrated gas blanketing system
  • Electric or EPA certified natural gas engine
  • Advanced, easy to use engine and compressor controls
  • Large capacity water and trash knock-out tank
  • Easy fill oil separator tank
  • V-belt or VFD drive for flexible pressure and volume matching
  • Gas engine oil reservoir with self leveling system
  • Automatic lubrication system for critical bearings
  • Rugged skid mounted containment system

Related products

Service Station Vapor Recovery

Attain Stage I compliance and make money. Service stations can now directly benefit from Jordan’s vapor recovery technology with our MT vapor recovery unit (VRU).

Miniaturized VRU technology recovers vapors from evaporative loss and product transfer and returns them to your service station storage tank as product you can resell. The Jordan Technologies MT-VRU is unique in the world marketplace today. In a single day, without costly construction, modifications to your facility’s existing piping or downtime, you can capture all Stage I VOCs and keep the recovered product in your underground storage tank. A MT-VRU requires only single phase power and has an extremely small footprint.

Jordan understands that traditionally displaced vapors are captured in a closed loop system between your underground tanks and the delivery truck’s tanker trailer. Jordan Technologies’ MT-VRU allows you to recover all of the vapors produced during product unloading, establish Stage I (truck unloading) vapor recovery compliance, return the captured VOCs to your underground tank and still allow you to realize fuel savings that pays for the technology.

The MT unit recovers evaporative vapors and Stage I vapors created during product delivery to the service station’s underground storage tanks.
As the delivery truck drops the load, vapor is generated and pushed out of the storage tank and into the MT unit via the vapor return line for separation and collection.
A single carbon bed designed to take the maximum vapor load generated during truck unloading accepts the generated vapors. As the vapors travel into and out of the carbon bed, clean air discharges into the atmosphere.
Once the truck unloading operation is complete, the MT unit is set for the regeneration mode. The vacuum pump de-absorbs the captured (rich) hydrocarbon vapors and discharges the saturated volatile organic compounds (VOCs) directly into the underground gasoline storage tank.
Once the saturated vapors are discharged into the liquid gasoline they may be readily absorbed into the gasoline.
Vacuum regeneration of the MT unit requires a fixed amount of time during which no other delivery can be made to the facility. During MT unit regeneration, gasoline loading at the dispensing area may continue uninterrupted.M2 basic operation

The components of the completely automatic M2 VRU include two carbon beds, a regeneration vacuum pump, a group of eight switching valves, a temperature switch and optional water cooled heat exchanger.
Excess vapors generated from the dispensing area or underground tanks are sent via the vapor pipe to the inlet of the M2 carbon pressure swing unit. The carbon beds operate on a 15-minute pressure swing cycle. While one bed is on line accepting and processing vapors, the other is off line being cleaned (vacuum regenerated) by the pump.
Vapors travel into and out of the online carbon taking a maximum load of vapors generated in a 15 minute period. The carbon bed is collecting the volatile organic vapors on the carbon and venting clean air out of the vent.
The vacuum pump of the regenerating (offline) bed de-adsorbs the captured (rich) hydrocarbon vapors and discharges the saturated volatile organic compounds directly into the liquid gasoline in the underground gasoline storage tank. Site specifics, like storage tank size, ambient heat, and the vapor pressures of stored petroleum liquid dictate the need for the optional water cooled heat exchanger.
Once the saturated vapors are discharged into the liquid gasoline they may be readily absorbed into the gasoline. Depending on temperature and vapor pressure characteristics of the stored gasoline, absorption may not be 100% efficient. Remaining vapors will discharge from the storage tank and mix once again with vapors from the dispensing area and cycle through the process outlined above.
Our process allows the service station tanks to remain under a slight negative pressure at all times. This prevents fugitive emissions from the tanks that no other systems can offer today.

MT-VRU features

Based on years of VRU service and engineering experience, Jordan Technologies now offers VRU technology with unique design and features for service station VOC recovery.

  • Easy, one-day installation
  • No modifications to your facility’s existing piping or concrete required
  • Small footprint
  • Low power consumption; only single phase power required
  • Proven technology for VOC handling
  • Creates and maintains slight negative pressure in your storage tank to prevent fugitive emissions
  • Recovered vapors = more product = increased profit

Service Station Vapor Recovery

Attain Stage I compliance and make money. Service stations can now directly benefit from Jordan’s vapor recovery technology with our MT vapor recovery unit (VRU).

Miniaturized VRU technology recovers vapors from evaporative loss and product transfer and returns them to your service station storage tank as product you can resell. The Jordan Technologies MT-VRU is unique in the world marketplace today. In a single day, without costly construction, modifications to your facility’s existing piping or downtime, you can capture all Stage I VOCs and keep the recovered product in your underground storage tank. A MT-VRU requires only single phase power and has an extremely small footprint.

Jordan understands that traditionally displaced vapors are captured in a closed loop system between your underground tanks and the delivery truck’s tanker trailer. Jordan Technologies’ MT-VRU allows you to recover all of the vapors produced during product unloading, establish Stage I (truck unloading) vapor recovery compliance, return the captured VOCs to your underground tank and still allow you to realize fuel savings that pays for the technology.

The MT unit recovers evaporative vapors and Stage I vapors created during product delivery to the service station’s underground storage tanks.
As the delivery truck drops the load, vapor is generated and pushed out of the storage tank and into the MT unit via the vapor return line for separation and collection.
A single carbon bed designed to take the maximum vapor load generated during truck unloading accepts the generated vapors. As the vapors travel into and out of the carbon bed, clean air discharges into the atmosphere.
Once the truck unloading operation is complete, the MT unit is set for the regeneration mode. The vacuum pump de-absorbs the captured (rich) hydrocarbon vapors and discharges the saturated volatile organic compounds (VOCs) directly into the underground gasoline storage tank.
Once the saturated vapors are discharged into the liquid gasoline they may be readily absorbed into the gasoline.
Vacuum regeneration of the MT unit requires a fixed amount of time during which no other delivery can be made to the facility. During MT unit regeneration, gasoline loading at the dispensing area may continue uninterrupted.M2 basic operation

The components of the completely automatic M2 VRU include two carbon beds, a regeneration vacuum pump, a group of eight switching valves, a temperature switch and optional water cooled heat exchanger.
Excess vapors generated from the dispensing area or underground tanks are sent via the vapor pipe to the inlet of the M2 carbon pressure swing unit. The carbon beds operate on a 15-minute pressure swing cycle. While one bed is on line accepting and processing vapors, the other is off line being cleaned (vacuum regenerated) by the pump.
Vapors travel into and out of the online carbon taking a maximum load of vapors generated in a 15 minute period. The carbon bed is collecting the volatile organic vapors on the carbon and venting clean air out of the vent.
The vacuum pump of the regenerating (offline) bed de-adsorbs the captured (rich) hydrocarbon vapors and discharges the saturated volatile organic compounds directly into the liquid gasoline in the underground gasoline storage tank. Site specifics, like storage tank size, ambient heat, and the vapor pressures of stored petroleum liquid dictate the need for the optional water cooled heat exchanger.
Once the saturated vapors are discharged into the liquid gasoline they may be readily absorbed into the gasoline. Depending on temperature and vapor pressure characteristics of the stored gasoline, absorption may not be 100% efficient. Remaining vapors will discharge from the storage tank and mix once again with vapors from the dispensing area and cycle through the process outlined above.
Our process allows the service station tanks to remain under a slight negative pressure at all times. This prevents fugitive emissions from the tanks that no other systems can offer today.

MT-VRU features

Based on years of VRU service and engineering experience, Jordan Technologies now offers VRU technology with unique design and features for service station VOC recovery.

  • Easy, one-day installation
  • No modifications to your facility’s existing piping or concrete required
  • Small footprint
  • Low power consumption; only single phase power required
  • Proven technology for VOC handling
  • Creates and maintains slight negative pressure in your storage tank to prevent fugitive emissions
  • Recovered vapors = more product = increased profit

VaporSep VRU

Jordan Technologies, working collaboratively with Membrane Technology & Research, Inc. (MTR), is pleased to introduce the VaporSep membrane vapor recovery system. Jordan’s years of project management and engineering services experience combined with MTR’s years of membrane development and research allows us to treat a wider range of chemicals and offer an option for recovery other than combustion for tank and truck loading facilities.
Jordan and MTR have significant experience in hydrocarbon recovery systems. More than fifty large units have been installed in petrochemical applications to recover butane, pentane, hexane, and other hydrocarbons. Hundreds more units have been installed for gasoline vapor recovery at truck loading and retail gasoline stations.
The VaporSep VRU is designed specifically to offer a more feasible way to treat vapors that are not compatible with a carbon based system. The membrane’s molecular sieve is custom designed for each application.
Jordan’s operating experience has revealed typical membrane life to be more than five (5) years. One of our earliest installations, a hydrocarbon recovery unit, is still operating with the original membrane modules installed over eight (8) years ago. If replacement is required, the cost is relatively low, and the procedure is very simple. Low maintenance cost and an extended life compared to competitor membrane systems are only a few of the reasons to explore a VaporSep membrane recovery unit and trust Jordan Technologies for your cutting edge vapor recovery solution.

Basic operation

The VaporSep VRU is a membrane-based system that combines compression, absorption, and membrane vapor separation to recover hydrocarbon vapors from truck loading operations. The VRU is designed to treat feed vapors coming from tank or truck loading operations. The unit uses available hydrocarbon liquid as the absorbent medium. Utilities required include only power and instrument air.
The feed stream is first compressed in a liquid ring compressor. The compressor outlet is sent to an absorber, where the gas flows upward and is contacted with downward flowing liquid absorbent. Hydrocarbons are absorbed from the vapor into the liquid. The recovered hydrocarbon liquid stream exits from the bottom of the column and is returned to storage.
The absorber overhead gas is sent to the VaporSep membrane, which separates the stream into a hydrocarbon-depleted residue gas and a hydrocarbon-enriched permeate stream. The residue gas (containing < 10 g/Nm3, or as required by the customer) is vented. The hydrocarbon-enriched permeate stream, at low pressure, is recycled via a vacuum pump to the compressor inlet.
Jordan Technologies’ vapor recovery unit is supplied as a complete skid mounted package (single skid for units up to ~ 500 Nm3/hr, multiple skids for larger units) including feed compressor, vacuum pump, membrane, and absorber.

Vaporsep features & benefits

VaporSep membranes separate gas mixtures on the basis of solubility. Large hydrocarbon molecules with greater solubility in the membrane permeate much faster than smaller, less soluble molecules such as nitrogen, hydrogen, or methane. By comparison, conventional membranes separate gases on the basis of size. Small molecules are selectively permeated because they diffuse through the membrane more rapidly than large molecules.
VaporSep membranes are manufactured as flat sheets and rolled into spiral-wound modules. The feed gas enters the module and flows between the membrane sheets. Spacers on the feed side and the permeate side of the membrane sheets create flow channels. The hydrocarbon vapor that passes preferentially through the membrane flows inward to a central permeate collection pipe. The light gas (nitrogen, hydrogen or methane) is rejected by the membrane and exits as the residue.

VaporSep VRUs provide many important features and benefits:

  • A better alternative for plants that handle petro-chemicals and chemicals
  • Compatible with a wider range of hydrocarbons and various crudes
  • Compact design; a smaller footprint compared to the equal sized carbon system
  • Steady state process for constant flow design applications
  • Fewer moving parts and control requirements compared to other technologies
  • Inlet compressor eliminates process pressure drop issues; inherently safe design
  • Skid mounted for easy installation, faster commissioning, lower installation costs and simpler transportation requirements
  • Low maintenance, operation and replacement cost
  • Proven technology with roughly 200 systems installed in the petrochemical, natural gas, and refining industry.
Low maintenance cost and an extended life compared to competitor membrane systems are only a few of the reasons to explore a VaporSep VRU and trust Jordan Technologies for your cutting edge vapor recovery solution.

VaporSep VRU

Jordan Technologies, working collaboratively with Membrane Technology & Research, Inc. (MTR), is pleased to introduce the VaporSep membrane vapor recovery system. Jordan’s years of project management and engineering services experience combined with MTR’s years of membrane development and research allows us to treat a wider range of chemicals and offer an option for recovery other than combustion for tank and truck loading facilities.
Jordan and MTR have significant experience in hydrocarbon recovery systems. More than fifty large units have been installed in petrochemical applications to recover butane, pentane, hexane, and other hydrocarbons. Hundreds more units have been installed for gasoline vapor recovery at truck loading and retail gasoline stations.
The VaporSep VRU is designed specifically to offer a more feasible way to treat vapors that are not compatible with a carbon based system. The membrane’s molecular sieve is custom designed for each application.
Jordan’s operating experience has revealed typical membrane life to be more than five (5) years. One of our earliest installations, a hydrocarbon recovery unit, is still operating with the original membrane modules installed over eight (8) years ago. If replacement is required, the cost is relatively low, and the procedure is very simple. Low maintenance cost and an extended life compared to competitor membrane systems are only a few of the reasons to explore a VaporSep membrane recovery unit and trust Jordan Technologies for your cutting edge vapor recovery solution.

Basic operation

The VaporSep VRU is a membrane-based system that combines compression, absorption, and membrane vapor separation to recover hydrocarbon vapors from truck loading operations. The VRU is designed to treat feed vapors coming from tank or truck loading operations. The unit uses available hydrocarbon liquid as the absorbent medium. Utilities required include only power and instrument air.
The feed stream is first compressed in a liquid ring compressor. The compressor outlet is sent to an absorber, where the gas flows upward and is contacted with downward flowing liquid absorbent. Hydrocarbons are absorbed from the vapor into the liquid. The recovered hydrocarbon liquid stream exits from the bottom of the column and is returned to storage.
The absorber overhead gas is sent to the VaporSep membrane, which separates the stream into a hydrocarbon-depleted residue gas and a hydrocarbon-enriched permeate stream. The residue gas (containing < 10 g/Nm3, or as required by the customer) is vented. The hydrocarbon-enriched permeate stream, at low pressure, is recycled via a vacuum pump to the compressor inlet.
Jordan Technologies’ vapor recovery unit is supplied as a complete skid mounted package (single skid for units up to ~ 500 Nm3/hr, multiple skids for larger units) including feed compressor, vacuum pump, membrane, and absorber.

Vaporsep features & benefits

VaporSep membranes separate gas mixtures on the basis of solubility. Large hydrocarbon molecules with greater solubility in the membrane permeate much faster than smaller, less soluble molecules such as nitrogen, hydrogen, or methane. By comparison, conventional membranes separate gases on the basis of size. Small molecules are selectively permeated because they diffuse through the membrane more rapidly than large molecules.
VaporSep membranes are manufactured as flat sheets and rolled into spiral-wound modules. The feed gas enters the module and flows between the membrane sheets. Spacers on the feed side and the permeate side of the membrane sheets create flow channels. The hydrocarbon vapor that passes preferentially through the membrane flows inward to a central permeate collection pipe. The light gas (nitrogen, hydrogen or methane) is rejected by the membrane and exits as the residue.

VaporSep VRUs provide many important features and benefits:

  • A better alternative for plants that handle petro-chemicals and chemicals
  • Compatible with a wider range of hydrocarbons and various crudes
  • Compact design; a smaller footprint compared to the equal sized carbon system
  • Steady state process for constant flow design applications
  • Fewer moving parts and control requirements compared to other technologies
  • Inlet compressor eliminates process pressure drop issues; inherently safe design
  • Skid mounted for easy installation, faster commissioning, lower installation costs and simpler transportation requirements
  • Low maintenance, operation and replacement cost
  • Proven technology with roughly 200 systems installed in the petrochemical, natural gas, and refining industry.
Low maintenance cost and an extended life compared to competitor membrane systems are only a few of the reasons to explore a VaporSep VRU and trust Jordan Technologies for your cutting edge vapor recovery solution.

Vapor Recovery

Jordan Technologies designs, manufactures and has actively serviced vapor recovery units (VRUs) since 1980. Jordan Technologies’ units recover a variety of VOCs in truck, rail, marine and tank breathing applications as well as crude, ethanol, and natural gases. As the largest service company for VRUs in the world market, Jordan provides service to the majority of the world’s operational VRUs, including other manufacturer’s equipment.
In 1995 Jordan Technologies expanded to not only servicing competitor’s equipment, but also to building a technologically advanced and reliable VRU. These systems include innovations and modifications based on our many years of service experience. A Jordan Technologies VRU is the most efficient, cost effective unit on the market.

Basic operation

The basic vapor recovery unit system is comprised of pressure swing absorption (PSA) process with two activated carbon bed vessels, alternating on a 15 minute time cycle. Regeneration of the carbon reactors is accomplished primarily by vessel evacuation with a vacuum pump to a pressure level of-27 Hg (3 Hg absolute) and secondly, with ambient air purge into the bed in a controlled manner during the last 25% of the regeneration cycle.

The VOCs (volatile organic compounds) desorbed from the carbon during reactor regeneration are effectively recovered in a single step process that is absorption in a packed tower, counter current flow, absorber. Supply tank absorbent is pumped on skid for use as lean oil in the absorber and as a heat exchange fluid for the vacuum pump.

All product recovered by the system is pumped back to the absorbent supply tank mentioned. Here the enriched recovered liquid product is allowed to disperse throughout the supply tank environment.
Jordan Technologies offers both the dry vacuum pump regeneration system as well as the liquid ring regeneration system.

VRU features

Based on many years of field service experience, Gordan Technologies have taken our knowledge and incorporated it into equipment and systems offering unique design and features that exceed industry needs.
Patented auto tuned vent and regeneration valves to protect vacuum pumps and carbon; increasing the life of the carbon

  • Patented return pump variable frequency drive level control to prevent gasoline spills
  • Self cleaning absorber tower with dished head bottom to eliminate confined space entry
  • Complete HMI control of all components and set points to allow for ease of operation
  • Remote web access for troubleshooting to reduce downtime
  • Historical trending of all VRU parameters and alarms
  • Skid mounted system; shipped and installed in four major parts
  • All components mounted and completely wired from the factory to skid mounted junction boxes
  • Skid and components designed for easy accessibility for maintenance and system checks
  • Reporting package specifically designed to meet Subpart BBBBBB regulations
  • Smallest industry footprint allows for reduced civil installation cost
  • Lowest industry energy consumption; reduces energy consumption on average 50% over competitive models
  • Typical return on investment less than 1 year; providing a quick payback and immediate profit increase
  • Robust design proven to pass HAZOP reviews by major oil companies globally
  • Every Jordan Technologies VRU meets local legislative requirements and is backed by Jordan’s unmatched worldwide service base. We have ten manufacturing sites located worldwide.

Vapor Recovery

Jordan Technologies designs, manufactures and has actively serviced vapor recovery units (VRUs) since 1980. Jordan Technologies’ units recover a variety of VOCs in truck, rail, marine and tank breathing applications as well as crude, ethanol, and natural gases. As the largest service company for VRUs in the world market, Jordan provides service to the majority of the world’s operational VRUs, including other manufacturer’s equipment.
In 1995 Jordan Technologies expanded to not only servicing competitor’s equipment, but also to building a technologically advanced and reliable VRU. These systems include innovations and modifications based on our many years of service experience. A Jordan Technologies VRU is the most efficient, cost effective unit on the market.

Basic operation

The basic vapor recovery unit system is comprised of pressure swing absorption (PSA) process with two activated carbon bed vessels, alternating on a 15 minute time cycle. Regeneration of the carbon reactors is accomplished primarily by vessel evacuation with a vacuum pump to a pressure level of-27 Hg (3 Hg absolute) and secondly, with ambient air purge into the bed in a controlled manner during the last 25% of the regeneration cycle.

The VOCs (volatile organic compounds) desorbed from the carbon during reactor regeneration are effectively recovered in a single step process that is absorption in a packed tower, counter current flow, absorber. Supply tank absorbent is pumped on skid for use as lean oil in the absorber and as a heat exchange fluid for the vacuum pump.

All product recovered by the system is pumped back to the absorbent supply tank mentioned. Here the enriched recovered liquid product is allowed to disperse throughout the supply tank environment.
Jordan Technologies offers both the dry vacuum pump regeneration system as well as the liquid ring regeneration system.

VRU features

Based on many years of field service experience, Gordan Technologies have taken our knowledge and incorporated it into equipment and systems offering unique design and features that exceed industry needs.
Patented auto tuned vent and regeneration valves to protect vacuum pumps and carbon; increasing the life of the carbon

  • Patented return pump variable frequency drive level control to prevent gasoline spills
  • Self cleaning absorber tower with dished head bottom to eliminate confined space entry
  • Complete HMI control of all components and set points to allow for ease of operation
  • Remote web access for troubleshooting to reduce downtime
  • Historical trending of all VRU parameters and alarms
  • Skid mounted system; shipped and installed in four major parts
  • All components mounted and completely wired from the factory to skid mounted junction boxes
  • Skid and components designed for easy accessibility for maintenance and system checks
  • Reporting package specifically designed to meet Subpart BBBBBB regulations
  • Smallest industry footprint allows for reduced civil installation cost
  • Lowest industry energy consumption; reduces energy consumption on average 50% over competitive models
  • Typical return on investment less than 1 year; providing a quick payback and immediate profit increase
  • Robust design proven to pass HAZOP reviews by major oil companies globally
  • Every Jordan Technologies VRU meets local legislative requirements and is backed by Jordan’s unmatched worldwide service base. We have ten manufacturing sites located worldwide.