SEALS

Category: Tags: , ,

General Introduction: We have a full range of primary and secondary seals for internal and external floating roofs. Our sealing systems are customized according to the characteristics of each tank and the requirements of our customers.

1. Primary Seals

2. Secondary Seals

3. The Internal Floating System is equipped with both the Primary and Secondary Seals.

Related products

FLOATING SUCTION SYSTEM

General Information: The Floating Suction System is designed to eliminate the accumulated product on the surface of the stored product.

Features:

  • It is designed to work in tanks of any size, with all types of floating roofs and with components compatible with any stored product.
  • It can be used with and without floating roofs.

The design is made for each specific case, guaranteeing a long life free of worries.

The Floating Suction System is installed at the Cadiz city (Spain)

 

FLOATING SUCTION SYSTEM

General Information: The Floating Suction System is designed to eliminate the accumulated product on the surface of the stored product.

Features:

  • It is designed to work in tanks of any size, with all types of floating roofs and with components compatible with any stored product.
  • It can be used with and without floating roofs.

The design is made for each specific case, guaranteeing a long life free of worries.

The Floating Suction System is installed at the Cadiz city (Spain)

 

CORRUGATED COVER

General Information: The TankCorr corrugated cover roof represents a new very competitive approach to solve coverage needs in water installations (sandblasting, decanters,..).

Features:

  • Self-supporting and a fairly light weight, minimize the volume of gases and odors existing under it.
  • This cover is highly resistant to corrosion and requires practically no maintenance.
  • The construction material is aluminium 3003 H16.
  • Design standard according to EUROCODE 1 and 9.
  • Matrix and finite element calculation.
  • Each design is supported by drawings and assembly instructions specific to each case.
  • It is suitable for installations of different geometries and shapes.

Corrugated Cover is installed at Seville city (Spain)

CORRUGATED COVER

General Information: The TankCorr corrugated cover roof represents a new very competitive approach to solve coverage needs in water installations (sandblasting, decanters,..).

Features:

  • Self-supporting and a fairly light weight, minimize the volume of gases and odors existing under it.
  • This cover is highly resistant to corrosion and requires practically no maintenance.
  • The construction material is aluminium 3003 H16.
  • Design standard according to EUROCODE 1 and 9.
  • Matrix and finite element calculation.
  • Each design is supported by drawings and assembly instructions specific to each case.
  • It is suitable for installations of different geometries and shapes.

Corrugated Cover is installed at Seville city (Spain)

Internal Floating Roof – Pontoon Type

General Information: The I.F.R. Pontoon type is a floating internal roof and an emission-controlling device suitable for installation into all types of fixed roof storage tanks containing all types of crude and refined products. The purpose of the internal floating roof is to minimize vapour zone above the stored liquid. This system reduces emissions and evaporative losses of storage products, and less corrosive or oxidizing elements would be produced in the tank when removing the vapour zone from the fixed roof storage tanks, resulting in reduced air pollution and long-term cost savings.

Features:

  • The assembled structure complies with the design requirements of the API 650 standard.
  • Calculation and design done according to EUROCODE Matrix Methods of Structural Analysis
  • The construction material can be Aluminum or Stainless Steel by the API 650 standard.
  • The materials are compatible with a broad range of stored products.
  • Strong enough to support all sealing systems, including both primary and secondary metal seals.
  • Extruded aluminum Floats with no longitudinal welds to improve safety and increase working life. Pontoons under pressure Factory tested.
  • All components fit through the manway for quick, easy installation

Its combination with an Aluminum Geodesic Dome provides maximum control of losses or emissions and the maximum utilization of the storage capacity.

Internal Floating Roof – Pontoon Type is installed at Talara City (Peru)

Internal Floating Roof – Pontoon Type

General Information: The I.F.R. Pontoon type is a floating internal roof and an emission-controlling device suitable for installation into all types of fixed roof storage tanks containing all types of crude and refined products. The purpose of the internal floating roof is to minimize vapour zone above the stored liquid. This system reduces emissions and evaporative losses of storage products, and less corrosive or oxidizing elements would be produced in the tank when removing the vapour zone from the fixed roof storage tanks, resulting in reduced air pollution and long-term cost savings.

Features:

  • The assembled structure complies with the design requirements of the API 650 standard.
  • Calculation and design done according to EUROCODE Matrix Methods of Structural Analysis
  • The construction material can be Aluminum or Stainless Steel by the API 650 standard.
  • The materials are compatible with a broad range of stored products.
  • Strong enough to support all sealing systems, including both primary and secondary metal seals.
  • Extruded aluminum Floats with no longitudinal welds to improve safety and increase working life. Pontoons under pressure Factory tested.
  • All components fit through the manway for quick, easy installation

Its combination with an Aluminum Geodesic Dome provides maximum control of losses or emissions and the maximum utilization of the storage capacity.

Internal Floating Roof – Pontoon Type is installed at Talara City (Peru)