Bernoulli’s principle states that for an inviscid flow, an increase in the speed of the fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid’s potential energy.[1][2] Bernoulli’s principle is named after the Dutch-Swiss mathematician Daniel Bernoulli who published his principle in his book Hydrodynamica in 1738.

Bernoulli’s principle can be applied to various types of fluid flow, resulting in what is loosely denoted as Bernoulli’s equation. In fact, there are different forms of the Bernoulli equation for different types of flow. The simple form of Bernoulli’s principle is valid for incompressible flows (e.g. most liquid flows) and also for compressible flows (e.g. gases) moving at low Mach numbers. More advanced forms may in some cases be applied to compressible flows at higher Mach numbers (see the derivations of the Bernoulli equation).
Bernoulli’s principle can be derived from the principle of conservation of energy. This states that in a steady flow the sum of all forms of mechanical energy in a fluid along a streamline is the same at all points on that streamline. This requires that the sum of kinetic energy and potential energy remain constant. If the fluid is flowing out of a reservoir the sum of all forms of energy is the same on all streamlines because in a reservoir the energy per unit mass (the sum of pressure and gravitational potential ρ g h) is the same everywhere.
Fluid particles are subject only to pressure and their own weight. If a fluid is flowing horizontally and along a section of a streamline, where the speed increases it can only be because the fluid on that section has moved from a region of higher pressure to a region of lower pressure; and if its speed decreases, it can only be because it has moved from a region of lower pressure to a region of higher pressure. Consequently, within a fluid flowing horizontally, the highest speed occurs where the pressure is lowest, and the lowest speed occurs where the pressure is highest.

The guided wave radar’s self-monitoring capability continually checks for any faults that could cause device failures or false indications. The device features a graphic display incorporated into an all digital electronics module

Máy chuyên dụng Mirage LB3060 là máy doa chuyên dụng có khả năng doa các lỗ có đường kính  từ 38mm-610mm có chiều dài đến 610mm, đặc biệt máy có thể doa lỗ của các mặt bích cách xa nhau đến 3000mm. Máy được thiết kế nhỏ gọn dễ dàng vận hành thuận tiện cho việc di chuyển, bảo dưỡng sửa chữa các thiết bị ở các công trình thi công.
Máy sử dụng truyền động bằng khí nén hoặc thủy lực rất an toàn cho dao cụ

Thay đuốc đốt bằng máy bay trực thăng

Video: