Cờ Lê Thủy Lực Dòng CD-Atlas copco

Danh mục:

Description: 

– The CD-Series from Tentec is an innovative range of low profile, direct drive, hydraulic torque wrenches. The ultra slim profile of the “same width” cassette and cylinder assembly is achieved by the use of a unique non circular drive piston and helps ensure that the CD series will fit onto those awkward restricted bolts.

– The CD-Series from Tentec is a versatile torque wrench. A single CD Series torque cylider can be fitted with many different sizes cassettes to torque different sized bolts/nuts. 

– Not only is the CD-Series a strong workhorse of a wrench, it also offers refined features that make the ease of use of this wrench, world class. From the full 360º by 360º swivel connections to a convenient pressure/torque chart, laser etched onto the nose of the tool.

Download Catalog here

Features:

  • Dual Independent Swivels
    360º by 360º swivels allow for individual movement of duplex hoses.
  • Non Circular Piston
    This feature allows the cylinder and cassette to be the same extreme low profile width.
  • High Strength Construction
    Both cylinder and cassette are manufactured from high strength, high grade aircraft alloy.
  • Quick Connect Couplers
    Each tool is fitted with quick connect, non drip, threadless safety couplers. “One way only” connections ensure the duplex hoses are connected correctly.
  • Link Pin
    One pin for cassette to cylinder engagement – no tool required for swapping ratchet cassettes.
  • Versatility
    Each CD series cylinder can be fitted with a range of cassettes to suit differing Hexagon nuts sizes.
  • Add-Ons
    Many special optional addons are available, such as spanner wrenches, reducers and sockets.
  • Non-Drip Quick Connect Couplers
    Assures easy and safe operation
  • Optional CD Handle Kit
    An ergonomically designed handle for the CD Series Torque Wrenches.Part Number: ACC-TCH-8.
  • Optional Quad Kit
    Link up to 4 CD – Series wrenches together using the PE/PA Quad Kit. Refer to the Tentec PE/PA Pump page for further details.

Sản phẩm liên quan

Đầu Siết Ốc Bu Lông Thủy lực-CTST

Description:   The CTST selection of tools from Tentec is a powerful and compact range of multi-purpose bolt tensioning tools. The tools are designed to suit most ANSI B16.5, ANSI B16.47 Series1, MSS-SP44, API-6A and API-17D flanges and feature well proven and highly reliable hydraulic seal technology.

Download Catalog here

Features:

  • High quality polyurethane seals for reliable, leak free operation.
  • Powerful bolt load capacity.
  • 15mm Ram Stroke*
  • Only 6 base tools to cover bolt sizes 3/4″ to 4″
  • Supplied with Nut Rotating Sockets, no need for drilled nuts.
  • Over stroke pressure safety device.
  • Manufactured from high strength steel for long life.
  • Easy Hose assembly with Tentec Link Hose System.

 

Đầu Siết Ốc Bu Lông Thủy lực-CTST

Description:   The CTST selection of tools from Tentec is a powerful and compact range of multi-purpose bolt tensioning tools. The tools are designed to suit most ANSI B16.5, ANSI B16.47 Series1, MSS-SP44, API-6A and API-17D flanges and feature well proven and highly reliable hydraulic seal technology.

Download Catalog here

Features:

  • High quality polyurethane seals for reliable, leak free operation.
  • Powerful bolt load capacity.
  • 15mm Ram Stroke*
  • Only 6 base tools to cover bolt sizes 3/4″ to 4″
  • Supplied with Nut Rotating Sockets, no need for drilled nuts.
  • Over stroke pressure safety device.
  • Manufactured from high strength steel for long life.
  • Easy Hose assembly with Tentec Link Hose System.

 

Cờ Lê Khí Nén – Atlas copco

Description:  – Tentec introduces the PN series industrial pneumatic torque wrenches. The new range provides continuous and repeatable torque with an accuracy of +/- 5%. Unlike previous pneumatic torque wrenches, the PN series has the fastest speed when it counts, which is during the actual torque stage and not during the free nut run down the stage.
– Inherent in all PN Series wrenches is a new gear technology that creates greater durability, lower operating temperatures and increased efficiency. The PN series offer a torque output from 162 N.m (120 ft. lbs) to 8134 N.m (6,000 ft.lbs) and rotational speeds of up to 45 rpm

– Download Catalog here

Features:

  • Hardened alloy steel for durability and long cycle life
  • Bearings support the loads experienced at the square drive
  • Multiple stage planetary gear system with optimized tooth design
  • Smooth ball bearing rotation of the gearbox housing independent from the motor handle
  • Lightweight aluminum handle with durable, slip-resistant textured coating
  • One finger trigger control for forward and revers
  • Ultra-efficient air motor provides accurate and repeatable stall torque
  • Cartridge-style valves provide easy replacement
  • O-rings seals grease in while keeping water and dirt out

 

Cờ Lê Khí Nén – Atlas copco

Description:  – Tentec introduces the PN series industrial pneumatic torque wrenches. The new range provides continuous and repeatable torque with an accuracy of +/- 5%. Unlike previous pneumatic torque wrenches, the PN series has the fastest speed when it counts, which is during the actual torque stage and not during the free nut run down the stage.
– Inherent in all PN Series wrenches is a new gear technology that creates greater durability, lower operating temperatures and increased efficiency. The PN series offer a torque output from 162 N.m (120 ft. lbs) to 8134 N.m (6,000 ft.lbs) and rotational speeds of up to 45 rpm

– Download Catalog here

Features:

  • Hardened alloy steel for durability and long cycle life
  • Bearings support the loads experienced at the square drive
  • Multiple stage planetary gear system with optimized tooth design
  • Smooth ball bearing rotation of the gearbox housing independent from the motor handle
  • Lightweight aluminum handle with durable, slip-resistant textured coating
  • One finger trigger control for forward and revers
  • Ultra-efficient air motor provides accurate and repeatable stall torque
  • Cartridge-style valves provide easy replacement
  • O-rings seals grease in while keeping water and dirt out

 

Máy Bơm Dùng Khí Nén Model: HHT.627x Series

Description:  The New Tentec air-operated pump units are designed and constructed to be failsafe, user friendly, lightweight
and compact. They work on a simple but efficient principle, power is magnified through differential piston areas. A large pneumatic piston drives a smaller hydraulic piston, which provides fluid flow at high pressure.
Pump assemblies can be supplied in many combinations, a choice of air motors and pressure gauges are available to ensure that the correct assembly is specified to meet the Bolt Tensioning requirements.

Download Catalog here

Features:

  1. Tentec Mini Air Driven Pump Unit

Tentec Air Driven Pump Unit operate on the simple but efficient principle of power magnification through the use of differential areas. A relatively large air-operated piston drives the smaller piston, which provides fluid flow at hight pressure. All Tentec air driven pump unit are fitted into an easily transportable,tubular steel frame.
The pump units are available, fitted with a large choice of pressure gauges and are supplied complete with an air pressure regulator which can be set to stall the pump unit when it reaches the pressure required for each particular tensioning application.

2.  Technical Specifications
Tentec supply many different air driven pump units, of varying pressure and fluid discharge specifications.

This document details the main tensioning air pump, the model HTT.627x Series.The Tentec standard tensioning pump configuration isthe model HTT.6271, with a maximum working pressureof 1500bar fitted with a suitable gauge and outlet connection.

For higher pressure needs the model HTT.627x series pump can be configured with a 2275bar max working
pressure, fitted with a suitable gauge and outlet connection. Part number HTT.6272

Máy Bơm Dùng Khí Nén Model: HHT.627x Series

Description:  The New Tentec air-operated pump units are designed and constructed to be failsafe, user friendly, lightweight
and compact. They work on a simple but efficient principle, power is magnified through differential piston areas. A large pneumatic piston drives a smaller hydraulic piston, which provides fluid flow at high pressure.
Pump assemblies can be supplied in many combinations, a choice of air motors and pressure gauges are available to ensure that the correct assembly is specified to meet the Bolt Tensioning requirements.

Download Catalog here

Features:

  1. Tentec Mini Air Driven Pump Unit

Tentec Air Driven Pump Unit operate on the simple but efficient principle of power magnification through the use of differential areas. A relatively large air-operated piston drives the smaller piston, which provides fluid flow at hight pressure. All Tentec air driven pump unit are fitted into an easily transportable,tubular steel frame.
The pump units are available, fitted with a large choice of pressure gauges and are supplied complete with an air pressure regulator which can be set to stall the pump unit when it reaches the pressure required for each particular tensioning application.

2.  Technical Specifications
Tentec supply many different air driven pump units, of varying pressure and fluid discharge specifications.

This document details the main tensioning air pump, the model HTT.627x Series.The Tentec standard tensioning pump configuration isthe model HTT.6271, with a maximum working pressureof 1500bar fitted with a suitable gauge and outlet connection.

For higher pressure needs the model HTT.627x series pump can be configured with a 2275bar max working
pressure, fitted with a suitable gauge and outlet connection. Part number HTT.6272