HIGH SPEED PRECISION LAT

Model: 750, 1000

Category:

FEATURES :

1.One piece Meehamite casting machine base.

2.Metric & inch gear box with full range, no-need gears exchange.

3.Apron enforced oil supply with safety device is used to avoid collision.

4.Bed ways & face of compound rest have been ultra-frequency treated & ground with longer life.

5.Cross way feeding guides screw: 2points support for heavy cutting.

6.Length safety foot brake.

7.Dynamically balanced alloy spindle by 3 point support.

8.Hardened & precision ground gears.

STANDARD ACCESSORIES
1. XZ-axes auto lubrication system 1 set 8.Center sleeve 1 pc
2. Metric/ lnch gear box 1 set 9.Center 2 pcs
3. Coolant device 1 set 10.Tool post screw wrench 1 set
4. Longitudinal apron motion feed 1 set 11.Level pads 1 set
5. Tailstock 1 set 12.Tools& tool box 1 set
6. 3-Jaw scroll chuck7」 1 set 13.Operation manual 1 set
7.Steady rest Ø6」 1 set

OPTIONAL ACCESSORIES
1. Follow rest 1 set
2. 4-jaw independent chuck 12」 1 set
3. Face plate 14」 1 set
4. Back flash guard 1 set
5. Halogen light 1 set
6. Digital readout linear scale 1 set
7. 3-Jaw strong scroll cruck

SPECIFICATIONS  Unit: mm / inch

ITEM
LA-460
MODEL
750
1000
CAPACITY
 Swing over bed
460 ( 18.11″ )
Swing over cross slide
295 ( 11.6″ )
Distance between centers
750 ( 29.53″ )
1000 ( 39.37″ )
BED
 Swing over gap
650 ( 25.6″ )
Width of bed
315 ( 12.4″ )
Width of gap (spindle end face)
210 ( 8.27″ )
Length of bed
1380 ( 54.33″ )
1880 ( 74″ )
HEADSTOCK
 Spindle bore diameter
ø52 (2.05″)
Numbered of spindle speeds
8 steps
Range of spindle speeds
80-1400 r.p.m.
Spindle nose
ASA A1-6
Taper of spindle
M.T.#6
CARRIAGE
 Width of carriage
430 ( 17″ )
Cross slide travel
250 ( 9.84″ )
Top slide travel( Compound rest travel )
125 ( 4.92″ )
Max. size cutting size
20×20 ( 0.79”x0.79″ )
TAILSTOCK
 Diameter of barrel
Ø52 (2.05″)
Travel of barrel
140 (5.51″)
Taper of barrel
M.T. 4
THREADS
Lead screw dia.& pitch
Dia 35mm Pitch 6mm / Dia.1″ x 4 T.P.I
Range of metric pitches
0.5 – 7.0 ( 22Nos )
Range of inch pitches
4 – 56 T.P.I. (36Nos )
Range of diametrical pitches
8-112 D.P. ( 36Nos )
Range of module pitches 0.25-3.5 M.P. (14Nos)
FEEDS
 Feed rod diameter
28 ( 1.1″ )
Range of longitudinal feeds
0.05 – 0.7 mm/rev ( 0.0197″-0.0276″ in/rev )
Range of cross feeds
0.025-0.35 mm/rev ( 0.001″-0.0138″ in/rev )
MOTOR
 Main spindle motor
5 HP ( 3.75kw )
Coolant pump motor
1/8 HP (0.1kw)
MEASUREMENT
 N.W.(approx)
1200 kgs
1300 kgs
G.W.(approxt)
1380 kgs
1500 kgs
Shipping dimensions (LxWxH)
1900x800x1400
75″x32″x55″
2200x850x1400
87″x34″x55″

Related products

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout

HEAVY DUTY PRECISION & POWERFUL LATHE

FEATURES :

1. Base:

Designed for heavy duty machining, high machine body structure to carry heavy workload and improve operational stability.

2. Gear Box:
(1)Full range Metric/ Inch gear box reduce inconvenience of gear exchange and speed up the operation.
(2)Two thread per inch (1″X2 T.P.I.) available, which offers much larger machining range than same class of lathes and pretty convenient to use.
3. Apron:
Enforced oil supply with safety device is used to avoid collision during turning operation.
4. Spindle:
12-step speed change, the spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy
carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
5. Carriage & saddle:
This part has been ultra-frequency treated with much longer service life.
6.Cross way feeding guide screw:
Two point support and suitable for heavy duty turning.
7. Compound rest:
Adapt 4-point tightened the rest to ensure the stability of compound rest.
Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
8. Tailstock:
Two stage fixed tailstock for heavy duty turning and drilling stability.
Two stage feeding device for easy operation.
STANDARD ACCESSORIES:
1. X,Z-axes auto lubrication system 9. Center sleeve MT-5
2. Metric / Inch gear box 10. Dead center
3. Coolant device 11. Toolpost screw wrench
4. Longitudinal adjustable position feed stop 12. Level pads
5. Tailstock two steps device 13. Tools & tool & tool box
6. 3-Jaw scroll chuck 10″ 14. Operation manual
7. Back plate of chuck 15. Longitudinal & cross rapid feeding – only for HG-2200,3200,4200
8. Steady rest φ11-“
* Actual standard accessories shall be subject to quotation sheet.
OPTIONAL ACCESSORIES:
1. Follow rest 8. Back splash guard
2. 4-jaw independent chuck 20″ ,25″ 9. Quick change tool post (instead of tool post) ( standard or European style )
3. Face plate with 4-jaw 24″,26″,28″,30″ 10. CE equipment
4. Longitudinal & cross rapid feeding – only for HG-1200,1700 11. Taper turning attachment
5. Halogen light 12. Grinder
6. Taper turning attachment 13. Hydraulic copy attachment
7. Digital readout

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

HEAVY DUTY FACING LATHE

FEATURES :

1.Base :
(1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable for processing of large work piece and
 enhanced heavy-duty cutting ability.
(2) The gap part base special with reinforced structure, it is no influence on cutting stability to break the gap for necessary.

2.Spindle :
(1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy speed jumping and three-point support for the box.
(2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to different work piece materials and speed.
(3) Gear and shaft are made of super alloy material with FAG bearings to offer durable cutting and low production noise.
(4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to achieve better lubrication effects.

3.Gear box :
Metric / Inch gear box free from gear exchange to improve production efficiency.
Speedy installation, forward and reverse movement, safety installation with automatic sealed oil bath lubrication system.

4.Apron feeding device :
Swift transmission, positive and negative rotation movement and safety device with sealed oil bath lubrication & cross rapid feeding.

5.Saddle :
Anti-friction processed surface with regular oil injection, lubricated and friction endurable.

6.Tailstock :
Two stage infeed device, swing arm movement to have smooth and labor saving operation.

7.Electrical control :
20HP motor, 2 stage safety start-up device and overloading power cut system.

8.Castings :
FC-30 steel are used for main structures like base, spindle, saddle and tailstock, which are annealed and have no
deformation.

9.Processing :
Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated,
precision ground for extended service life.

STANDARD ACCESSORIES : 
1.Lubricating device for headstock 1 set 8.Face plate with 4-jaw 60″ 1 set
2.Spindle motor :30HP 1 set 9.Dead center 2 pcs
3.Magnetic brake 1 set 10.Center sleeve 1 pc
4.Metric / Inch gearbox 1 set 11.Tool post screw wrench 1 set
5..Longitudinal & cross rapid feeding 1 set 12.Level pads 1 set
6.XZ-axes auto lubrication 1 set 13.Tools & tool box 1 set
7.XZ-axes with Turcite-B 1 set 14.operation manual 1 set
OPTIONAL ACCESSORIES :
1.Strong tailstock device
2.Face plate with 4-jaw 70″
3.Coolant device
4.Spindle bore (230mm) 9″
5.Spind nose:A2-15
6.Spind nose:A2-20

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”

 

CNC Heavy Duty Lathe

FEATURES :

1.This is a heavy-duty precision CNC lathe that the function of output full horsepower during low & high speed, available for big,
special parts and mold work pieces.

2. The structure of the bed adopted high toughness mechanic cast iron; to stabilize proper parallel precision. Bed ways are induction
hardened and ground.

3. The slideway and ball screw can be lubricated automatically by a central lubrication system. Oil flow and lubrication frequency can
be set as desired. An alarm occurs in case of a lack of oil.

4. The coolant system delivers high-pressure coolant to flush chips and extend tool service life.

5. Mechanical and electrical are designed all in one.

OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600 (POU YUAN made in Taiwan) 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”
OPTIONAL ACCESSORIES:
1-1 Controller : FAGOR 8040TC 5-1 Electronic 4-way turret H4 (32x32mm)
1-2 Controller : FAGOR 8055TC 5-2 Hydraulic turret V8 (32x32mm)
1-1 Controller : LNC-T600
(POU YUAN made in Taiwan)		 6 Chip conveyor with bucket
2 Transformer 7 Boring attachment
3-1 3-jaw wedge type through-hole power chuck 12″ 8 Air coolersystem (for electric cabinet)
3-1 3-jaw wedge type non through-hole power chuck 12″ 9 Tailstock hydraulic quill
3-1 3-jaw 12″ 10 Tailstock hydraulic with lock bolt
4 4-jaw independent 20”